HRE MODELS HRE3601 | HRE3001 | HRE2401 COOK LIKE A GOD USE AND CARE MANUAL
USE AND CARE MANUAL PROFESSIONAL ELECTRIC RANGES HRE MODELS HRE3601 | HRE3001 | HRE2401
Contents BEFORE YOU BEGIN 2 POSITIONING THE OVEN RACKS 14 ANTI-TIP DEVICE 2 OPERATING THE OVEN 15 Oven 15 IMPORTANT SAFETU INSTRUCTIONS 3 Important 3 safety instructions What you need to know about safety instructions 3 For your safety 3 Important safety instructions 3 Surface cooking units Electrical use bumer use 15 Oven cooking safety guidelines 15 Oven 15 function Broiler operation 16 4 Cleaning and maintenance 17 4 Cleaning stainless steel surfaces 17 Child safet
Before you begin READ THESE INSTRUCTIONS COMPLETELY AND CAREFULLY. Important note to the installer • Read all instructions contained in these installation instructions before installing the range. • Remove all packing materials from the oven compartments before connecting the electric supply to the range. Anti-tip device WARNING To reduce the risk of tipping the range,the range must be secured by a properly installed Anti-Tip device.
Important safety instructions Important safety instructions CALIFORNIA PROPOSITION 65 WARNING FOR YOUR SAFETY CAUTION Cancer and Reproductive Harm-www.P65Warnings.ca.gov. Important safety instructions Read and follow all instructions before using your oven to prevent the risk of fire, electric shock, personal injury, or damage when using the range.This guide does not cover all possible conditions that may occur. Always contact your service agent or manufacturer about problems that you do not understand.
Important safety instructions Important safety instructions SURFACE COOKING UNITS ELECTRICAL SAFETY • Never leave surface units unattended at high heat settings. Boilovers cause • Proper Installation - Be sure your appliance is properly installed and grounded by a qualified technician.
Important safety instructions Important safety instructions OVEN VENTILATING HOOD • DO NOT TOUCH THE HEATING ELEMENTS OR INTERIOR SURFACES OF THE OVEN. Heating elements may be hot even though they are dark in color. Interior surfaces of an oven become hot enough to cause burns. During and after use, do not touch or let clothing or other flammable materials contact the heating elements or interior surfaces of the oven until they have had sufficient time to cool.
Important safety instructions • This appliance must be properly grounded. • Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line. - This may result in electric shock, fire, an explosion, or problems with the product • Do not cut or remove the ground prong from the power cord under any circumstances. • Connect the oven to a circuit that provides the correct amperage.
Product Dimension Product Dimension 24'' Electric Range 36'' Electric Range 30'' Electric Range CHECKING THE INSTALLATION SITE Clearances and dimensions To install the range, refer to the following figure. For installation in CANADA, a Free-standing range is not to be installed closer than 12mm from any adjacent surface. CAUTION This range has been designed to comply with the maximum allowable wood cabinet temperatures of 194°F.
Preparing to install the range Connecting the power Minimum dimensions STEP 1. MEETING ELECTRICAL CONNECTION REQUIREMENTS To eliminate the risk of burns or fire caused by reaching over heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of 5" beyond the bottom of the cabinets.
Connecting the power Connecting the power 2.For power cord installations only, hook the strain relief over the power cord hole located below the rear of the drawer body. Insert the power cord through the strain relief and tighten the device. STEP 4 3-wire power cord WARNING Strain relief Electrical Shock Hazard Electrical ground is required on this appliance. Do not connect to the electrical supply until appliance is permanently grounded.
KD Installation Procedures Your Thor Kitchen range might have a KD Knob + handle design that need to be installed. Please Follow up the following procedures for Knob + Oven door handle installation. KD Installation Procedures 3. Secure the oven handle with two screws on each door handle holder (if not, handle might be loose) 1. Check the knobs OFF OFF MED 4. Secure the oven handle with two screws on each door handle holder (if not, handle might be loose) 2.
Rubber Pad Installation on Back Panel To Prevent the range too close to the wall, there are 2 plastic pads offered with the user's manual, please find the accessories and follow the below steps: Introducing your new range 24 inch Overview 1. check the installation kit packed with manual. 1 2 4 3 5 2 pcs screws 2. Install 2 pcs rubber pad as showed above. 6 7 2 pcs rubber pad 30/36 inch Overview 1 2 3 4 5 6 7 01.Glass surface 02.Control knob 03.Oven door 04.Oven light 05.Oven fan 06.
Introducing your new range What’s included with your range * Wire racks (2) Cooktop cooking CAUTION * Broiler pan (1 set) Before you begin Clean the oven thoroughly before using it for the first time. Then, remove the accessories, set the oven to bake, and then run the oven at 350 °F for 30 minutes. There will be a distinctive odor. This is normal. Ensure your kitchen is well ventilated during this conditioning period.
Cooktop cooking Cooktop cooking Location of the radiant surface elements and controls The radiant control knobs operate the radiant surface elements on the cooktop as shown below. Cooking areas 24 inch Pans should not extend more than .5 to 1 in. (1.3 to 2.5 cm) beyond the cooking area.
Cooktop cooking Positioning the oven racks What your cookware is made of determines how evenly and quickly heat is transferred from the surface burner to the pan bottom. You can remove and reposition the oven racks in any of the six rack positions. Each oven rack has a built-in stop to prevent it from accidentally being pulled completely out. Correct positioning of the oven racks provides the best cooking results. MATERIAL DESCRIPTION Aluminum Excellent heat conductor.
Operating the oven Operating the oven Oven Burmer Use Oven Cooking Safety Guidelines Oven Temperature Knob To light the oven burner, push and turn the appropriate control knob counterclockwise to the (150°F~500°F) position. Once burner ignition has been achieved, turn the burner control knob to adjust the desired temperature setting. Do not push and turn the control knob clockwise from the “OFF” position. Do not turn the control knob without pushing it.
Operating the oven Operating the oven 3. Preheat the oven to the temperature stated in the recipe. Depending on the temperatureand Broiler Operation the size of the oven, preheating will vary. For better cooking performance and exact oven cavity temperature, preheating time will be 10 mins per 100 Degrees. 4. Arrange pans and food items evenly on the shelves. Make sure pans do not touch each other or the sides of the oven. When baking a single item, always center the item on the oven shelf.
Cleaning and maintenance WARNING • Always make sure that the controls are off and all surfaces are cool before removing or cleaning any of the range parts. This will prevent you from getting burned. • If your range is pulled out from the wall for any reason, make sure that the anti-tip device is reengaged after your range has been pushed back into place. Failure to take this precaution could result in your range tipping and personal injury.
Cleaning and maintenance Cleaning and maintenance Cleaning the surface burner control knobs Cleaning sugary spills and melted plastics WARNING Do not use spray cleaners on the surface burner control panel. Spray entering the valve holes could contact electrical components resulting in death, personal injury, or product damage. 1. Make sure that all surface burner knobs are in the OFF position. 2. Pull the control knobs straight off the surface burner control valve stems.
Removing the Oven Door Removing the Oven Door Removing and replacing the oven door Replacing the oven door Do not lift the oven door by its handle.Doing so may damage the door. Make sure the oven and the door are cool before you begin to remove the door. IMPORTANT Before removing the door,make sure there is a large enough clear,protected surface in the kitchen to rest the door on. The oven door is heavy! Removing the oven door 1.Hold the door firmly in an approximately open position. 1.
Trouble shooting Trouble shooting Thorkitchen works hard to ensure that you don’t have problems with your new gas range. If you experience a problem, look first for a solution in the table below. If, after trying the suggested solution, you’re still having trouble, call Thorkitchen at 877-288-8099. Problem The range is not level. The appliance must be accessed for servicing and cannot be moved easily. Possible cause The appliance has been installed improperly.
Trouble shooting Warranty and Service Oven Problem The oven doesn’t work (no heating). Possible causes No power supply (oven light and halos do not come on either). No gas supply (gas ovens). 21 What to do Check that the circuit breaker hasn’t tripped and there is no power outage in your area. If there is a power outage, you cannot use the oven until power has been restored. The supply to the house may not be working or there may be an outage. Contact your local gas supplier.
WELCOME TO THE CLUB You chose THOR Kitchen to enhance your culinary journey and we’re stoked to have you in the club. Think of it as a secret society of really savvy people, such as yourself, choosing professional power and performance at an affordable price. Register your product by following the steps below. WARRANTY REGISTRATION Scan theQR code or visit thorkitchen.com/warranty Input your product info and select register You’re done. Let’s get cookin’.