Cut Sheet

FS/FD Cast Device Boxes and Covers
A-51
United States
Tel: [phone]
800.816.7809
Fax: [phone]
Technical Services
Tel: [phone]
www.tnb.com
Application
• Accommodate wiring devices
• Act as pull boxes for conductors in a threaded rigid
conduit system, including an internal ground screw
• Provide openings to make splices and taps
in conductors
• Provide access to conductors for maintenance
and future system changes
• Connect conduit sections
Features
• All hubs have NPT Threads with a minimum of five full
threads and integral bushing. Internal grounding screw
standard on boxes
• Suitable for wet locations when used with gasketed covers
• Available in shallow (FS) or deep (FD) boxes. Use
FD if device to be enclosed exceeds 1
5
⁄8" in depth
• Use blank bodies where special arrangements
of conduit hubs or entrances are required
• All cover holes are #6-32
• Mounting lugs are standard on all FS and FD boxes
Size Range
• Hubs:
1
⁄2" to 1" NPT
Materials
• Boxes: Class 30 gray iron alloy
• Covers: Sand cast aluminum alloy and sheet steel
• Gaskets: Neoprene
Finish
• Zinc-plated with aluminum acrylic paint
Listings/Compliances
• UL 514A (wet locations when used with gasketed covers)
• CSA C22.2 No.18
Dead-End
Dead-End
Cast Device Boxes
Thru-Feed