Cut Sheet
Table Of Contents
- T&B Fitting
- Product Overview
- Rigid & Intermediate Metal Conduit Fittings
- Form 7, Form 8, Series 35, Conduit Outlet Bodies & Covers
- Mogul Conduit Outlet Bodies
- FS/FD Cast Device Boxes and Covers
- Conduit Outlet Boxes
- Conduit Outlet Elbows, Reducers, Plugs, and Adapters
- Three-Piece Couplings
- Sealing Fittings
- Kopr-Shield Compound
- Jacketed Metal Clad Cable Termination Fittings
- Tray Cable Fittings
- EMT Fittings
- Liquidtight Flexible Metal Conduit Fittings
- Shureflex™ Nylon Conduit System
- XTRA FLEX System
- Flexible Cord and Cable Fittings
- Flexible Cord and Cable Fittings - Non-Metallic
- Service Entrance Cable Fittings
- Metal Clad Cable, Armored Cable and FlexibleMetal Conduit Fittings
- Non-Metallic Sheathed Cable Fittings
- Conduit Dimensional Data
Rigid and Intermediate Metal Conduit Fittings
105° C rated by UL Made from
flame retardant, non-dripping
thermoplastic.
CAT.
DIMENSIONS (IN.)
NO.
SIZE A B
1451
1
⁄2" 1.060 .400
1452
3
⁄4" 1.300 .400
1453 1" 1.590 .400
1454 1
1
⁄4" 1.860 .450
1455 1
1
⁄2" 2.240 .570
1456 2" 2.740 .570
Wall thickness of electrical box .095 max.
Meets Coast Guard Regulation CB293.
UL File No. E-13938 CSA File No. 4484
Made from flame-retardant, non-dripping thermoplastic, UL rated 105° C!
Application
• To plug open end of conduit or connector
in order to prevent ingress of trash,
dirt or moisture during construction
and remodeling
Features
• Wide range of applications; can be used
with rigid metal conduit, intermediate
metal conduit, electrical metallic tubing,
all connnectors and all bushings
• Designed to stand up to normal
handling and is functionally
unaffected by moisture
• Economically seal out grout and plaster
from any fitting or raceway conforming
to CSA dimensional tolerances
• Used under a bushing to seal
end of conduit during construction
• Completely salvageable
CAT. NO.
SIZE
815-TB
1
⁄2"
816
3
⁄4"
817 1"
818 1
1
⁄4"
819 1
1
⁄2"
820 2"
CAT. NO.
SIZE
821 2
1
⁄2"
822 3"
824 3
1
⁄2"
823 4"
UL not applicable.
CSA File No. 2884
Plug, Conduit, Connectors (Push-Penny
®
Plugs)
Eliminates need for separate capped bushing or steel penny and bushing!
• Just push into place
• Pressure holds plug fast against
internal surface of fitting or raceway
• Made of flexible plastic
Made to fit any bushing!
Pennies — Steel
CAT. NO.
SIZE
1470
1
⁄2"
1471
3
⁄4"
1472 1"
1473 1
1
⁄4"
1474 1
1
⁄2"
1475 2"
1476*2
1
⁄2"
1477*3"
1478*3
1
⁄2"
1479*4"
*Not CSA Certified.
CSA File No. 2884
UL not applicable.
Standard Material
Polyethylene
Standard Finish
As molded
Listings/Compliances
CSA (LR2884, LR4484)
UL 514B
CSA C22.2 No. 18
NFPA 70
NEMA FB1
Knockout Plugs
Application
• To plug unused knockout openings in a box or enclosure
Features
• One-piece construction designed to snap in place
• High impact strength self-extinguishing non-dripping
(per UL-94) thermoplastic construction
1451 Series
Standard Material
Thermoplastic rated for 105° C (221° F) application
Standard Finish
As molded
Range
.875" through 2.469" Nominal Diameter
Knockout opening (
1
⁄2" through 2" trade size knockouts)
Wall thickness of box or enclosure
.095" max. up to 1" trade size
.140" max. through 2" trade size.
Listings/Compliances
UL (UL File No. E13938)
CSA (LR589)
UL 514B
NFPA 70
A-13
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com