Cut Sheet
Table Of Contents
- T&B Fitting
- Product Overview
- Rigid & Intermediate Metal Conduit Fittings
- Form 7, Form 8, Series 35, Conduit Outlet Bodies & Covers
- Mogul Conduit Outlet Bodies
- FS/FD Cast Device Boxes and Covers
- Conduit Outlet Boxes
- Conduit Outlet Elbows, Reducers, Plugs, and Adapters
- Three-Piece Couplings
- Sealing Fittings
- Kopr-Shield Compound
- Jacketed Metal Clad Cable Termination Fittings
- Tray Cable Fittings
- EMT Fittings
- Liquidtight Flexible Metal Conduit Fittings
- Shureflex™ Nylon Conduit System
- XTRA FLEX System
- Flexible Cord and Cable Fittings
- Flexible Cord and Cable Fittings - Non-Metallic
- Service Entrance Cable Fittings
- Metal Clad Cable, Armored Cable and FlexibleMetal Conduit Fittings
- Non-Metallic Sheathed Cable Fittings
- Conduit Dimensional Data
XTRA FLEX
®
System —
Conduit, Tubing, Fittings for Non-Metallic Liquidtight Conduit
Specification Sheet — Bullet
®
Liquidtight Fittings
or Liquidtight Flexible Non-Metallic Conduit and Tubing
Box or
Enclosure
Wall
Conduit
or Tubing
Application
A series of nonmetallic connectors designed
to provide a liquidtight seal when terminating
liquidtight nonmetallic conduit (UL Type B)
or liquidtight nonmetallic tubing to a box or
enclosure with knockout opening or a
threaded hub.
Plastic Bullet
®
Liquidtight
Fittings Features
• Connector assembles to conduit
without disassembly and is designed
to be installed with a positive
installation criteria gland bottoms
on body shoulder
• Rugged low profile non-metallic
body and gland construction (1); the
connector is equipped with a steel
locknut to firmly secure connector
to box or an enclosure and a sealing
O-Ring
• Captivated sealing O-Ring (2) with
predetermined compression for a
reliable seal at enclosure
• Connector ferrule designed to accept
variations in conduit inside diameter
and is tolerant of field conduit cuts (3)
• The profile of ferrule is designed to
reduce friction between conduit I.D.
and ferrule, (4) enabling conduit to
seat properly for an effective seal
• Outer surface of the clamping fingers
provided with friction reducing ridges
(5) for ease of installation; the inner
surface is designed with conduit
biting teeth to enhance clamping
and sealing action (6)
• Performance of connectors tested
to simulate adverse installation
conditions
• Provides a double sealing action (7)
• Elongated gland nut profile (8)
de signed to provide additional
strain relief for 90° pull and
an easy hand grip.
• Performance of connector unaffected
by exposure to detergents, cleaners
and sanitizers commonly encountered
in food processing plants and typical
industrial environment; also
unaffected by cutting fluids, wiring
pulling compounds and marine
environment. The connector meets
industry standards for cold impact
and simulated hammer blow.
Standard Material/Finish
• Body Gland — Weather stabilized
thermoplastic (black)
• O-Ring — Neoprene (black)
• Locknut — Steel/electro zinc plated
• Material Temperature Rating —
thermoplastic -40° C to 105° C
• Material Flammability Rating:
UL 94-V2
Listings/Compliances
• UL (File# E23018)
• CSA (File# LR52391)
• CSA 22.2 #227.2 & CSA 22.2 #227.3
• ANSI/U.L.514B-1988
• Watertight requirements of NEMA
Type 4 and NEMA Type 6 enclosures
• Federal Standard H28 (NPT threads)
• Suitable for hazardous locations —
Class I Div. 2; Class II Div. 1 & 2;
Groups E,F, & G; Class III per N.E.C.;
Article 501-4, 502-4 and 503-3
• NEMA 6P
Suggested Specification:
Where liquidtight flexible non-metallic conduit
(UL Type B) or liquidtight flexible non-metallic
tubing is terminated to a box or enclosure, the
non-metallic connectors used shall be able to
be installed without disassembly and provide
a positive installation criteria. In the installed
condition, the connector must provide a seal
meeting watertight requirements of NEMA Type
4 and Type 6 enclosures. The performance of
connectors shall be unaffected by exposure to
detergents, sanitizers, cutting fluids, wire pulling
compounds and oil base industrial paints. The
connector must also be capable of withstanding
Marine environment and cold impact simulating
a hammer blow. Installed connectors shall be of
the elongated gland type as manufactured by
Thomas & Betts LT38P series.
A-126
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com