Planning and Design Guide

174
INDUCTION COOKTOPS
INSTALLATION
30-INCH COOKTOP AND CUTOUT DIMENSIONS
IMPORTANT: Thermador 30" Induction Cooktops
are not approved to be installed above wall ovens.
NOTE: The work surface should be horizontal and level.
The stability of the countertop should be conrmed even
after making the cutout.
30-INCH & 36-INCH INDUCTION COOKTOP CABINET
REQUIREMENTS
The distance from the top of the cooktop to the bottom of the
cabinets above it must be A = 30" (762 mm) minimum. This
distance can be reduced to A = 24" (610 mm) when the bottom of
the wood or metal cabinet is protected by not less than
1
/
4
" (6.35
mm) ame retardant millboard, covered by no. 28 steel sheet 0.015
(.4 mm) thick stainless steel, 0.024" (0.6 mm) aluminum, or 0.020"
(0.5 mm) thick copper, at a minimum. Verify that the cabinets above
the cooktop are a maximum of B = 13" (330 mm) deep.