Installation guide

I_ Put the mains plug into the socket.

IT]In the case of Side-by-Side appliances a separate

socket must be used for each appliance.

I_ Prevent the power cord from becoming caught.

Tie a piece of string to the middle of the power cord

and feed forwards under the appliance. When

pushing in the appliance, pull the cable forwards.

Using adhesive tape, stick the power cord to the

floor centrally behind the appliance approx. 15"

(380 mm) away from the rear panel of the cavity.

Carefully push the appliance into the cavity until

the height-adjustable wheel interlock with the

anti-tip brackets.

12.

Installing and

appliance

aligning the

I_ Remove edge protection.

Align the appliance with the furniture fronts.

Place marking-out level over the installation aid

parts on the door.

The installation aid parts on the door have been

designed for the following total thickness of furniture

doors:

_ 3A,,(19 mm)

- 11/2"(38 mm)

Always take account of the possible differing

thickness of the furniture fronts which are to be

fitted subsequently.