HomeConnect
Step 2.1: Connect your appliance to your
home network with WPS
Please enter step 2.1 only when prompted to by the app.
The following steps describe operations at the home
appliance itself.
1 | Press the Settings button on your appliance and use the
or
button to navigate to HomeConnect.
Install with Enter
1
Home Connect
Installation
TIMERS SETTINGS
ENTER
2 | Press Enter to continue.
3 | Press Enter to conrm the precondition.
Continue with Enter
3
You need to have installed the Home
Connect app and set up a Home
Connect account.
TIMERS SETTINGS
ENTER
4 | Activate the WPS function on your home network router
within the next 2 minutes.
The following message appears in the display of your
appliance: Network connection successful. Continue
with connecting to app.
Press Enter to connect to app
TIMERS SETTINGS
ENTER
Network connection successful.
Continue with connecting app.
The app will get notied once your appliance has been
successfully connected to your Wi-Fi network.
5 | Press Enter to continue.
6 | Follow the instructions in the app.
Information:
If the connection could not be established within
2 minutes, make sure your appliance is within the
range of your Wi-Fi network.
For some appliances the WPS mode is also called
"automatic mode".
EN5