Instructions for Use

Table Of Contents
35
5.
Leave the appliance door ajar in the stop position
(approx. 30°) for approx. one hour to allow the enamel
surfaces in the oven cavity to dry thoroughly.
Removing Heavy Food Deposits
You have several options for removing particularly
stubborn food deposits.
Leave the vinegar solution to work for some time
before starting Easy Clean.
Rub vinegar solution onto the food and food spills on
the smooth surfaces before starting Easy Clean.
Repeat the Easy Clean function after the oven cavity
has cooled down.
Self Clean
During Self Clean, the oven is heated to a very high
temperature. Remnants from roasting, broiling or baking
are burned off and all you have to do is wipe the ash out
of the oven cavity after the oven has cooled.
9 WARNING
WHEN USING THE SELF CLEAN FEATURE
During the elimination of soil during self-cleaning,
small amounts of Carbon Monoxide can be
created and the fiberglass insulation could give
off very small amounts of formaldehyde during
the first several cleaning cycles. To minimize
exposure to these substances, provide good
ventilation with an open window, or use a
ventilation fan or hood.
Do not block the oven vent(s) during the Self
Clean cycle. Always operate the unit according to
the instructions in this User Guide.
When using the Self Clean feature, confirm that
the door locks and will not open. If the door does
not lock, do not run Self Clean. Contact Customer
Service.
The appliance becomes very hot during Self
Clean. Never hang flammable items such as
dishcloths on the door handle. Keep the front of
the appliance clear. Keep children away.
The high temperature during Self Clean destroys
non-stick coatings on trays and molds and toxic
gases are produced. Never leave anything in the
oven during Self Clean.
NOTICE: Do not clean parts or accessories with the Self
Clean feature.
Preparing the pyrolytic self-cleaning feature
9 CAUTION
Risk of fire! Loose food remnants, fat and meat
juices may catch fire. Wipe the cooking
compartment with a damp cloth.
Remove the worst food spills from the oven.
Clean the door seals, the inside of the door and the
glass pane by hand as these parts are not cleaned
during the pyrolytic self-cleaning cycle.
Remove any loose parts from inside the cooking
compartment. Make sure that nothing is left inside the
cooking compartment.
Close the oven door.
Setting
The "Self Clean ˜" function can only be started once the
oven cavity is cold (room temperature) and the appliance
door is closed.
For your safety the appliance door is locked during this
operation.
Depending on the degree of soiling you can select three
different intensity levels for the Self Clean cycle:
1.
Remove the accessories from the oven cavity.
2.
Touch the ON l OFF touch button.
3.
Touch the MENU touch button.
4.
Swipe to the left or right to select "Self Clean˜".
5.
Select a cleaning intensity.
6.
Touch “Continue”.
7.
Confirm that you have removed heavy soil and
accessories from the oven cavity.
8.
Touch the START l STOP touch button.
The door lock is activated automatically. The Self
Clean program is started.
Note: After the completion of a Self Clean cycle, the
oven will not allow you to start another Self Clean cycle
for 24 hours. For a double oven, if one cavity runs Self
Clean, neither cavity may operate a Self Clean cycle for
24 hours.
When Self Clean is Completed
When the Self Clean program has run through, a signal
sounds and the appliance ends the operation
automatically.
The appliance will remain locked while cooling off. Once
the oven cavity has cooled off, the lock will be
deactivated automatically.
Wipe out the remaining ash from the oven cavity with a
damp cloth.
Avoid These Cleaners
Do not use commercial oven cleaners such as Easy
Off®. They may damage the oven finish or parts.
Never use scouring pads or abrasive cleaners.
Intensity level Duration (excluding cool off)
high 3 hours
medium 2 ½ hours
low 2 hours