Operation Manual

8
3 m
5 m
12 m
180°
6 m
•
Recommended installation height: 2 – 4 m
•
Crosswise detection area: 12 m (crosswise to the detector)
•
Frontal detection area: 5 m (in front of the detector)
•
Detection angle: 150°/180°
5. Direction test and alignment
The walk test is used to test the detection range and to res-
trict it if necessary.
 Set the potentiometer time (min) to test.
The motion detector now only reacts to movement (indepen-
dent of brightness).
 Crosswise to the detection area. After the motion detector
has detected a movement, it switches on for 2 s.
 Note direction of motion during the test.