Installation & Assembly

ManualsBrandsThe Sliding Door Company ManualsDoors & Door HardwareGlass Sliding Closet Doors

Closet Door Installation Instructions

(Flexible Track System)

www.slidingdoorco.com

Ref: FTS - Instructions For Closet Door - 042116

INS-FTSCD

Summary of content (7 pages)

PAGE 1
Closet Door Installation Instructions (Flexible Track System) www.slidingdoorco.com All Rights reserved by The Sliding Door Company, Inc. Materials and information contained herein may not be used for any other purpose. © 2016 The Sliding Door Co. SPACE PLUS is a division of The Sliding Door Co.
PAGE 2
PG 02 Tools Required: You will need the following tools: The number of individuals required is based on the weight of your panel. We recommend at least 2 able individuals.
PAGE 3
PG 03 Becoming familiar with your Closet Door System: Fig. 2 (1) Double Upper Track Screws for Upper Track Available in various colors (2) screws every 16” of track length (See Suggested Screw Types) Upper Track Door Park Zinc plated steel (4) Upper Wheels Available in Silver (2) Sliding Panels Rail/Stile Size option: 1-1/2” or 3” (shown).
PAGE 4
PG 04 Installing the Upper Track: Fig. 3 1. Measure the width of the top of the opening. Mark your upper track at this dimension. 2. Using the metal saw, cut the upper track at the mark made in the previous step (the width of the top of your opening.) See figure 3. 3. Mark the locations of the pilot holes on top of the track. The first hole should be 3” on center from the edge of the track. There on out, mark every 16” throughout the rest of the track. See figure 4. 4.
PAGE 5
PG 05 Fig. 10 Installing the Bottom Track: 1. Measure the width of the bottom of the opening and mark the bottom track at this dimension. 2. Using the metal saw, cut the bottom track at the mark made in the previous step (the width of the bottom of your opening). See figure 10. 3. Place bottom track on the floor 1” back from the front of the opening. Confirm fit and installation direction. The hook(s) should point towards the BACK. See figure 6. 4. Mark the location of the track, then put it aside.
PAGE 6
PG 06 5. Angle the panel and insert the top of the panel into the backmost channel of your upper track. Pivot the panel so that it can gently rest on top of the bottom track. See figure 18. 6. Place one of the wheel mechanisms into the bottom track channel in which the panel will sit. The wheel mechanism should hook onto the lip of the bottom track. See figure 19. 7.
PAGE 7
PG 007 Install your Wheel Covers: 1. Align the pegs on the wheel cover to the holes on the vertical stile/frame. See figure 23. The letters correlate to each other. 2. Once the pegs are aligned, firmly push the wheel cover onto the door. Make sure all edges of the wheel covers are touching the stile/frame and there are no gaps. See figures 24 & 25. Wheel cover: Panel Stile: a a b b c c Fig. 24 Fig. 23 Install Wheel Covers Fig. 25 Each panel will include a Door Park.