Installation Guide

INSTALLATION INSTRUCTIONS
For Outdoor Lantern (Rev. 05/06/2011)
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.





Fig. 1
Fig. 2
1. Shut off power at the circuit breaker and remove the old
fixture including the mounting hardware.
2. Carefully unpack your new fixture and lay out all the
parts on a clear area. Take care not to lose any small
parts necessary for installation.
3. Pull the black, white and ground wires out of Post (C).
4. Next, connect electrical wires while supporting the
lantern as shown in (Fig.2). If your outlet has a ground
wire (green or bare copper), connect the fixture ground
wire to it. If not, consult your electrician for proper
grounding. After wires are connected, tuck them
carefully inside the post. Align the lantern with post and
secure bottom assembly (A) with Screws (B) (Fig.1 &
2).
5. Install the light bulbs in accordance with the fixture’s
specifications. (DO NOT EXCEED THE MAXIMUM
WATTAGE RATING!!)
Your installation is now complete. Return power to the
junction box and test the fixture.
Note:
Illustration (Fig.1) on this manual is for
installation purposes only. It may or may not be
identical to the fixture purchased.
LA-934E
FIXTURE
WIRES
Black or
Smooth
H
O
U
S
E
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
H
O
U
S
E
WIRES
White
(Neutral)
FIXTURE
WIRES
Green or
Bare
Copper
(Ground)
H
O
U
S
E
WIRES
Green
(Ground)
A
B
C
