User manual

Press [MASTER | PUSH FOR DSP] three times during operation to call up the unit's DSP function
‘2 Level Meters’ . ‘INPUT 1’ appears in the display along with a graphical representation of input
level 1. Turn the knob until ‘INPUT 2’ appears in the display along with a graphical representa‐
tion of input level 2.
Press [MASTER | PUSH FOR DSP] four times during operation to call up the unit's DSP function
‘High Pass Filter’ . ‘80 Hz’ (frequency attenuation below 80 Hz) appears in the display. Press
again [MASTER | PUSH FOR DSP] to enable this function. Or turn the knob to select another cut-
o frequency ‘100 Hz’ , ‘120 Hz’ or ‘150 Hz’ and press [MASTER | PUSH FOR DSP] to call it up.
2 level meters
Low-Cut lter
DSP functions
Active speaker
24