Owner manual

INSTRUCTIONS
Item 15108 - Tripod Grill
Thank you for purchasing this Texsport tripod grill. Please read and understand each step of the set-up instructions. We encourage you to set-up
this tripod grill at least once prior to your camping trip, ensuring that you have a satisfactory understanding of the set-up process. We hope you
enjoy your new tripod grill and that it will give you many years of camping pleasure.
Do not apply excessive force to this product.
PARTS LIST:
A........3 Chain-corded leg poles
B........1 Triangular support
chain
C........1 Adjustable lever
D........1 Primary support chain
E........Circular grill
A
B
C
D
E
STEP 1 - Assemble the 3
chain-corded leg poles. Slide
adjusting leber over the
tappered end of 1 leg pole.
STEP 2 - Insert the 3 leg poles
into the triangular support plate.
The flat surface of the triangular
support plate faces up.
STEP 3 - Feed the primary sup-
port chain through the triangular
support plate openings.
QUESTIONS:
If you should have any questions, problems or comments, please call our Customer Service Department at
1-800-231-1402 or e-mail [e-mail]. This Department is open M–F from 8 a.m.–5 p.m. CST.
STEP 4 - Hook the small “S” hook
into the adjusting lever as shown
above.
STEP 5 - This is how your
grill should look like.
STEP 6 - The three support chains,
which have been preassembled,
should now be attached at equal
distances around the grill using
the convenient snap clips.
STEP 6 - Hook the “S” hook to
the primary support chain.
This tripod grill can be used as a
lantern hanger by removing the
grill assembly and handin a
lantern using the bail handle.