User's Manual

www.ti.com Board Pin Assignment
2.1 Pin Descriptions
No. Name Type Description
1 SLOW_CLK I Slow clock input
2 GND G Ground
3 GND G Ground
4 WL_EN I WLAN Enable
5 VBAT P Power supply input
6 GND G Ground
7 VBAT P Power supply input
8 VIO P Power supply input for I/O pin
9 GND G Ground
10 N.C. No connection
11 WL_RS232_TX O WLAN tool RS232 output
12 N.C. No connection
13 WL_RS232_RX I WLAN tool RS232 input
14 N.C. No connection
15 WL_UART_DBG O WLAN Logger output
16 N.C. No connection
17 N.C. No connection
18 GND G Ground
19 GND G Ground
20 SDIO_CLK I WLAN SDIO clock
21 N.C. No connection
22 GND G Ground
23 N.C. No connection
24 SDIO_CMD I/O WLAN SDIO command
25 N.C. No connection
26 SDIO_D0 I/O WLAN SDIO data bit 0
27 N.C. No connection
28 SDIO_D1 I/O WLAN SDIO data bit 1
29 N.C. No connection
30 SDIO_D2 I/O WLAN SDIO data bit 2
31 N.C. No connection
32 SDIO_D3 I/O WLAN SDIO data bit 3
33 N.C. No connection
34 WLAN_IRQ O WLAN SDIO interrupt out
35 N.C. No connection
36 N.C. No connection
37 GND G Ground
38 N.C. No connection
39 N.C. No connection
40 N.C. No connection
41 N.C. No connection
42 GND G Ground
43 N.C. No connection
44 N.C. No connection
45 N.C. No connection
46 N.C. No connection
47 GND G Ground
7
SWRU359C–September 2013–Revised January 2014 WL1835MODCOM8B WLAN MIMO and Bluetooth
®
Module Evaluation Board for
TI Sitara™ Platform
Submit Documentation Feedback
Copyright © 2013–2014, Texas Instruments Incorporated