Datasheet

TVP5158, TVP5157, TVP5156
SLES243G –JULY 2009–REVISED APRIL 2013 www.ti.com
Four-Channel NTSC/PAL Video Decoders
Check for Samples: TVP5158, TVP5157, TVP5156
1 Introduction
1.1 Features
1234
– Support crystal interface with on-chip
• Common Device Features
oscillator and single clock input mode
(TVP5158, TVP5157, and TVP5156)
– Single 27-MHz clock input or crystal for all
– Four separate video decoder channels
standards and all channels
having the following features for each
channel – Internal phase-locked loop (PLL) for line-
locked clock (separate for each channel) and
• Accepts NTSC (J, M, 4.43) and PAL (B, D,
sampling
G, H, I, M, N, Nc, 60) video data
– Standard programmable video output format
• Composite video inputs, pseudo-
differential video inputs to improved • ITU-R BT.656, 8-bit 4:2:2 with embedded
noise immunity syncs
• High-speed 10-bit ADC • YCbCr 16-bit 4:2:2 with embedded syncs
• Fully differential CMOS analog – Macrovision™ copy protection detection
preprocessing channels with clamping
– 3.3-V compatible I/O
• Integrated anti-aliasing filter
– 128-pin TQFP package
• 2D 5-line (5H) adaptive comb filter
– Available in commercial (0°C to 70°C)
• Noise reduction and auto contrast temperature range
• Robust automatic video standard • Additional TVP5158 and TVP5157 Specific
detection (NTSC/PAL) and switching Features
• Programmable hue, saturation, – Integrated four-channel audio ADC with
sharpness, brightness, and contrast audio sample rate of 8 kHz or 16 kHz
• Luma-peaking processing – Support Master and Slave mode I
2
S Output
• Patented architecture for locking to weak, – Support audio cascade connection
noisy, or unstable signals
• Additional TVP5158 Specific Features
– Four independent scalers support horizontal
– Enhanced channel multiplexing capability –
and/or vertical 2:1 downscaling
Line-interleaved mode
– Channel multiplexing capabilities with
– Four-channel D1 multiplexed output at 8 bit
metadata insertion
at 108 MHz
• Pixel-interleaved mode supports up to
– Video cascade connection for 8-Ch CIF, 8-Ch
four-channel D1 multiplexed 8-bit output
Half-D1, and 8-Ch CIF + 1-Ch D1 outputs
at 108 MHz
– Also available in Industrial (-40°C to 85°C)
• Supports concurrent NTSC and PAL
temperature range
inputs
• Qualified for Automotive Applications
(AEC-Q100 Rev G – TVP5158IPNPQ1,
TVP5158IPNPRQ1)
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2DaVinci is a trademark of Texas Instruments.
3Macrovision is a trademark of Macrovision Corporation.
4All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date. Products conform to
Copyright © 2009–2013, Texas Instruments Incorporated
specifications per the terms of the Texas Instruments standard warranty. Production
processing does not necessarily include testing of all parameters.