Datasheet

TVP5150AM1

www.ti.com

SLES209E–NOVEMBER 2007– REVISED OCTOBER 2011

3.21.26 Interrupt Reset Register B

Address 1Ch

Default 00h

7 6 5 4 3 2 1 0

Software Macrovision Reserved Field rate Line alternation Color lock H/V lock TV/VCR

initialization detect changed changed reset changed reset changed reset changed reset changed reset

reset reset

Interrupt reset register B is used by the external processor to reset the interrupt status bits in interrupt

status register B. Bits loaded with a 1 allow the corresponding interrupt status bit to reset to 0. Bits loaded

with a 0 have no effect on the interrupt status bits.

Software initialization reset

0 = No effect (default)

1 = Reset software initialization bit

Macrovision detect changed reset

0 = No effect (default)

1 = Reset Macrovision detect changed bit

Field rate changed reset

0 = No effect (default)

1 = Reset field rate changed bit

Line alternation changed reset

0 = No effect (default)

1 = Reset line alternation changed bit

Color lock changed reset

0 = No effect (default)

1 = Reset color lock changed bit

H/V lock changed reset

0 = No effect (default)

1 = Reset H/V lock changed bit

TV/VCR changed reset [TV/VCR mode is determined by counting the total number of lines/frame. The

mode switches to VCR for nonstandard number of lines]

0 = No effect (default)

1 = Reset TV/VCR changed bit

Submit Documentation Feedback