Datasheet

TVP5150AM1

www.ti.com

SLES209E–NOVEMBER 2007– REVISED OCTOBER 2011

Vertical blanking on/off

0 = Vertical blanking (VBLK) off (default)

1 = Vertical blanking (VBLK) on

Clock output enable

0 = SCLK output is high impedance

1 = SCLK output is enabled (default)

Note: To achieve lowest power consumption, outputs placed in the high-impedance state should not be

left floating. A 10-kΩ pulldown resistor is recommended if not driven externally.

Note: When enabling the outputs, ensure the clock output is not accidently disabled.

Table 3-13. Digital Output Control

(1)

YCbCr OUTPUT NOTES

(TVPOE) (VDPOE)

0 X High impedance After both YCbCr output enable bits are programmed

X 0 High impedance After both YCbCr output enable bits are programmed

1 1 Active After both YCbCr output enable bits are programmed

(1) VDPOE default is 1, and TVPOE default is 0.

Submit Documentation Feedback