Datasheet

SLES084C − August 2007TVP5146

Table 2−10. Registers Summary (Continued)

C SUBADDRESS DEFAULT R/W

Interrupt status 0 F2h R/W

Interrupt status 1 F3h R/W

Interrupt mask 0 F4h 00h R/W

Interrupt mask 1 F5h 00h R/W

Interrupt clear 0 F6h 00h R/W

Interrupt clear 1 F7h 00h R/W

Reserved F8h–FFh

NOTE: R = Read only

W = Write only

R/W = Read and write

Reserved register addresses must not be written to.

Table 2−11. VBUS Register Summary

C SUBADDRESS DEFAULT R/W

Reserved 00 0000h–80 051Bh

VDP closed caption data 80 051Ch–80 051Fh R

VDP WSS data 80 0520h–80 0526h R

Reserved 80 0527h–80 052Bh

VDP VITC data 80 052Ch–80 0534h R

Reserved 80 0535h–80 053Fh

VDP V-Chip data 80 0540h–80 0543h R

Reserved 80 0544h–80 05FFh

VDP general line mode and line address 80 0600h–80 0611h 00h, FFh R/W

Reserved 80 0612h–80 06FFh

VDP VPS/Gemstar data 80 0700h–80 070Ch R

Reserved 80 070Dh–90 1903h

VDP FIFO read 90 1904h R

Reserved 90 1905h–B0 005Fh

Interrupt configuration B0 0060h 00h R/W

Reserved B0 0061h–FF FFFFh

NOTE: Writing any value to a reserved register may cause erroneous operation of the TVP5146 decoder.

It is recommended not to access any data to/from reserved registers.