Datasheet

TVP5146M2

www.ti.com

SLES141H –JULY 2005– REVISED FEBRUARY 2012

Table 2-107. Interrupt Raw Status 1 Register

Subaddress F1h

Read only

7 6 5 4 3 2 1 0

Reserved Macrovision Standard FIFO full

status changed changed

Macrovision status changed:

unmasked

0 = Macrovision status unchanged

1 = Macrovision status changed

Standard changed:

unmasked

0 = Video standard unchanged

1 = Video standard changed

FIFO full:

0 = FIFO not full

1 = FIFO was full during write to FIFO

The FIFO full error flag is set when the current line of VBI data cannot enter the FIFO. For example, if the FIFO has only 10 bytes left

and teletext is the current VBI line, the FIFO full error flag is set, but no data is written because the entire teletext line does not fit.

However, if the next VBI line is closed caption requiring only 2 bytes of data plus the header, this goes into the FIFO even if the full

error flag is set.

Submit Documentation Feedback

Product Folder Link(s): TVP5146M2