User's Manual
Table Of Contents
- TRF7970A Evaluation Module (EVM)
- 1 TRF7970A EVM Description
- 2 Using the TRF7970A EVM With PC GUI
- 2.1 USB Driver
- 2.2 TRF7970A EVM GUI Startup
- 2.3 ISO15693 Tab
- 2.3.1 Inventory (Command Code 0x01)
- 2.3.2 Read Single Block (Command Code 0x20)
- 2.3.3 Write Single Block (Command Code 0x21)
- 2.3.4 Lock Block (Command Code 0x22)
- 2.3.5 Read Multiple Blocks (Command Code 0x23)
- 2.3.6 Write Multiple Blocks (Command Code 0x24)
- 2.3.7 Stay Quiet (Command Code 0x02)
- 2.3.8 Select (Command Code 0x25)
- 2.3.9 Reset to Ready (Command Code 0x26)
- 2.3.10 Write AFI (Command Code 0x27)
- 2.3.11 Lock AFI (Command Code 0x28)
- 2.3.12 Write DSFID (Command Code 0x29)
- 2.3.13 Lock DSFID (Command Code 0x2A)
- 2.3.14 Get System Information (Command Code 0x2B)
- 2.3.15 Get Multiple Block Security Status (Command Code 0x2C)
- 2.3.16 TI Custom Commands
- 2.4 ISO14443A Tab
- 2.5 ISO14443B Tab
- 2.6 FeliCa Tab
- 2.7 Find Tags Tab
- 2.8 Registers Tab
- 2.9 NFC-PP Tab
- 2.10 Test Tab
- 3 Abbreviations
- 4 References
www.ti.com
Using the TRF7970A EVM With PC GUI
2.3.9 Reset to Ready (Command Code 0x26)
The Reset to Ready Command is an optional command that returns the VICC(s) in the Quiet state to the
Ready state. This command can be sent as an addressed or unaddressed request and the same end
result can also be achieved by turning off the activating field from the VCD or removing the VICC(s) from
the activating field.
To perform Reset to Ready command using the GUI:
1. Perform sixteen slot Inventory command (see Section 2.3.1) to obtain UIDs of VICCs.
2. Leave VICCs in field.
3. Perform Stay Quiet command on each transponder (see Section 2.3.7).
4. Select the radio button for Reset to Ready.
5. Click Execute.
Figure 13. Reset to Ready Command Example
19
SLOU321– August 2011 TRF7970A Evaluation Module (EVM)
Submit Documentation Feedback
Copyright © 2011, Texas Instruments Incorporated