Datasheet
TPS65070, TPS65072, TPS65073
TPS650731, TPS650732, TPS650701, TPS650702, TPS650721
SLVS950G –JULY 2009–REVISED MAY 2013
www.ti.com
TSCMODE. Register Address: 08h
TSCMODE B7 B6 B5 B4 B3 B2 B1 BO
Bit name and function TSC_M2 TSC_M1 TSC_M0
Default 0 0 0 0 0 1 1 1
Set by signal
Default value loaded by: UVLO UVLO UVLO
Read/write R R R R R R/W R/W R/W
Bit 3..0 MODE SELECT BITS FOR THE TOUCH SCREEN INTERFACE
Note: Data conversions using the touch screen interface require setting the touch screen mode with register
TSCMODE and selecting the analog input channel for the ADC according to the following table.
Measurement of x-position:
• Set TSCMODE to 000 to select x-position measurement
• Set Bit AD ENABLE=1 to provide power to the ADC.
• Set input select for the ADC in register ADCONFIG to 1110 (AD_IN14 selected).
• Start a conversion by setting CONVERSION START=1; wait until END OF CONVERSION=1
• Read register ADRESULT_1 and ADRESULT_2
TSC_M2 TSC_M1 TSC_M0 TSX1 TSX2 TSY1(AD_ TSY2(AD_ MODE MEASUREMENT
(AD_IN1) (AD_IN2) IN3) IN4)
0 0 0 TSREF GND A/D HiZ X-Position Voltage TSY1
0 0 1 A/D HiZ TSREF GND Y-Position Voltage TSX1
0 1 0 TSREF TSREF GND GND Pressure Current TSX1 and
TSX2
0 1 1 TSREF GND HiZ HiZ Plate X Current TSX1
1 0 0 HiZ HiZ TSREF GND Plate Y Current TSY1
1 0 1 V2 V2 GND GND TSC standby Voltage TSX1 and
TSX2
1 1 0 A/D A/D A/D A/D A/D Voltage measurement
with ADC
1 1 1 open open open open TSC and ADC
disabled (no interrupt
generation)
ADRESULT_1. Register Address: 09h
ADRESULT_1 B7 B6 B5 B4 B3 B2 B1 BO
Bit name and function AD_BIT7 AD_BIT6 AD_BIT5 AD_BIT4 AD_BIT3 AD_BIT2 AD_BIT1 AD_BIT0 LSB
Default x x x x x x x x
Set by signal
Default value loaded
R R R R R R R R
by:
Read/write
50 Submit Documentation Feedback Copyright © 2009–2013, Texas Instruments Incorporated
Product Folder Links: TPS65070 TPS65072 TPS65073 TPS650731 TPS650732 TPS650701 TPS650702
TPS650721