Datasheet

TPS381 3 J DBV R
Reel
Package
25
Nominal Supply Voltage
Nominal Threshold Voltage
Functionality
Family
TPS3813J25, TPS3813L30
TPS3813K33, TPS3813I50
SLVS331G –DECEMBER 2000–REVISED OCTOBER 2013 www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
PACKAGE AND ORDERING INFORMATION
PACKAGE INFORMATION
(1)
T
A
DEVICE NAME THRESHOLD VOLTAGE MARKING
TPS3813J25DBV 2.25 V PCDI
TPS3813L30DBV 2.64 V PEZI
–40°C to +85°C
TPS3813K33DBV 2.93 V PFAI
TPS3813I50DBV 4.55 V PFBI
(1) For the most current package and ordering information see the Package Option Addendum at the end
of this document, or see the device product folder at www.ti.com.
Figure 1. ORDERING INFORMATION
ABSOLUTE MAXIMUM RATINGS
Over operating free-air temperature range (unless otherwise noted).
(1)
UNIT
Supply voltage
(2)
7 V
V
DD
RESET –0.3 V to V
DD
+ 0.3 V
All other pins
(2)
–0.3 V to 7 V
I
OL
Maximum low output current 5 mA
I
OH
Maximum high output current –5 mA
I
IK
Input clamp current (V
I
< 0 or V
I
> V
DD
) ±20 mA
I
OK
Output clamp current (V
O
< 0 or V
O
> V
DD
) ±20 mA
Continuous total power dissipation See Dissipation Rating Table
T
A
Operating free-air temperature range –40°C to +85°C
T
stg
Storage temperature range –65°C to +150°C
Soldering temperature +260°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to GND. For reliable operation the device should not be operated at 7 V for more than t = 1000h
continuously.
DISSIPATION RATING TABLE
T
A
< +25°C DERATING FACTOR T
A
= +70°C T
A
= +85°C
PACKAGE POWER RATING ABOVE T
A
= +25°C POWER RATING POWER RATING
DBV 437 mW 3.5 mW/°C 280 mW 227 mW
2 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: TPS3813J25 TPS3813L30 TPS3813K33 TPS3813I50