Datasheet

TPS22960
www.ti.com
SLVS914B APRIL 2009REVISED AUGUST 2013
TERMINAL FUNCTIONS
TERMINAL
DESCRIPTION
DCN RSE
NAME
PIN NO. PIN NO.
1 1 V
IN1
Switch 1 input; bypass this input with a ceramic capacitor to GND
2 2 ON1 Switch 1 control input, active high. Do not leave floating.
3 7 ON2 Switch 2 control input, active high. Do not leave floating.
4 8 V
IN2
Switch 2 input; bypass this input with a ceramic capacitor to GND
5 5 V
OUT2
Switch 2 output
6 6 GND Ground
Slew rate control pin. SR = GND translates into a 75-μs rise time; SR = high translates into a
7 3 SR
660-μs rise time
8 4 V
OUT1
Switch 1 output
ABSOLUTE MAXIMUM RATINGS
(1)
MIN MAX UNIT
V
IN
Input voltage range –0.3 6 V
V
OUT
Output voltage range V
IN
+ 0.3 V
V
ON
Input voltage range –0.3 6 V
I
MAX
Maximum continuous switch current 0.5 A
T
A
Operating free-air temperature range –40 85 °C
T
J
Maximum junction temperature 125 °C
T
stg
Storage temperature range –65 150 °C
Human-Body Model (HBM) 2000
ESD Electrostatic discharge protection V
Charged-Device Model (CDM) 1000
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
DISSIPATION RATINGS
DERATING
BOARD PACKAGE RθJC RθJA FACTOR ABOVE T
A
25°C T
A
= 70°C T
A
= 85°C
T
A
= 25°C
High-K
(1)
DCN 123°C/W 220°C/W -4.545 mW/°C 454.5 mW 250 mW 181.1 mW
High-K
(1)
RSE 60°C/W 116°C/W -8.621 mW/°C 862.1 mW 474.1 mW 344.8 mW
(1) The JEDEC High-K (2s2p) board used to derive this data was a 3 × 3 inch, multilayer board with 1-ounce internal power and ground
planes and 2-ounce copper traces on top and bottom of the board
RECOMMENDED OPERATING CONDITIONS
MIN MAX UNIT
V
IN
Input voltage range 1.62 5.5 V
V
OUT
Output voltage range V
IN
V
V
INx
= 3.0 V to 5.5 V 1.5 5.5
V
IH
High-level input voltage: ON1, ON2, SR V
V
INx
= 1.62 V to 3.0 V 1.4 5.5
V
INx
= 3.0 V to 5.5 V 0.5
V
IL
Low-level input voltage: ON1, ON2, SR V
V
INx
= 1.62 V to 3.0 V 0.4
C
IN
Input capacitor 1
(1)
μF
(1) See Application Information
Copyright © 2009–2013, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Links: TPS22960