Datasheet

TMS320F2810, TMS320F2811, TMS320F2812

TMS320C2810, TMS320C2811, TMS320C2812

www.ti.com

SPRS174T –APRIL 2001–REVISED MAY 2012

4.5 Multichannel Buffered Serial Port (McBSP) Module

The McBSP module has the following features:

• Compatible to McBSP in TMS320C54x™/ TMS320C55x™ DSP devices, except the DMA features

• Full-duplex communication

• Double-buffered data registers which allow a continuous data stream

• Independent framing and clocking for receive and transmit

• External shift clock generation or an internal programmable frequency shift clock

• A wide selection of data sizes including 8-, 12-, 16-, 20-, 24-, or 32-bits

• 8-bit data transfers with LSB or MSB first

• Programmable polarity for both frame synchronization and data clocks

• Highly programmable internal clock and frame generation

• Support A-bis mode

• Direct interface to industry-standard CODECs, Analog Interface Chips (AICs), and other serially

connected A/D and D/A devices

• Works with SPI-compatible devices

• Two 16 x 16-level FIFO for Transmit channel

• Two 16 x 16-level FIFO for Receive channel

The following application interfaces can be supported on the McBSP:

• T1/E1 framers

• MVIP switching-compatible and ST-BUS-compliant devices including:

– MVIP framers

– H.100 framers

– SCSA framers

– IOM-2 compliant devices

– AC97-compliant devices (the necessary multiphase frame synchronization capability is provided.)

– IIS-compliant devices

• McBSP clock rate = CLKG = CLKSRG/(1 + CLKGDIV) , where CLKSRG source could be LSPCLK,

CLKX, or CLKR.

(2)

(2) Serial port performance is limited by I/O buffer switching speed. Internal prescalers must be adjusted such that the peripheral speed is

less than the I/O buffer speed limit—20-MHz maximum.

Submit Documentation Feedback

Product Folder Link(s): TMS320F2810 TMS320F2811 TMS320F2812 TMS320C2810 TMS320C2811 TMS320C2812