Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsMicrocontrollers, Microprocessors & QuartzesEmbedded microcontroller LQFP 100 (14x14) 32-Bit 100 MHz I/O number 35

TMS320F2809, TMS320F2808, TMS320F2806

TMS320F2802, TMS320F2801, TMS320C2802

TMS320C2801, TMS320F28016, TMS320F28015

www.ti.com

SPRS230N –OCTOBER 2003–REVISED MAY 2012

Table 2-1. Hardware Features (100-MHz Devices)

FEATURE TYPE

(1)

F2809 F2808 F2806 F2802 F2801 C2802 C2801

Instruction cycle (at 100 MHz) – 10 ns 10 ns 10 ns 10 ns 10 ns 10 ns 10 ns

18K 18K

10K 6K 6K 6K 6K

Single-access RAM (SARAM) (16-bit word) – (L0, L1, M0, M1, (L0, L1, M0, M1,

(L0, L1, M0, M1) (L0, M0, M1) (L0, M0, M1) (L0, M0, M1) (L0, M0, M1)

H0) H0)

3.3-V on-chip flash (16-bit word) – 128K 64K 32K 32K 16K – –

On-chip ROM (16-bit word) – – – – – – 32K 16K

Code security for on-chip flash/SARAM/OTP blocks – Yes Yes Yes Yes Yes Yes Yes

Boot ROM (4K x 16) – Yes Yes Yes Yes Yes Yes Yes

One-time programmable (OTP) ROM

– 1K 1K 1K 1K 1K – –

(16-bit word)

PWM outputs 0 ePWM1/2/3/4/5/6 ePWM1/2/3/4/5/6 ePWM1/2/3/4/5/6 ePWM1/2/3 ePWM1/2/3 ePWM1/2/3 ePWM1/2/3

ePWM1A/2A/3A/ ePWM1A/2A/ ePWM1A/2A/

HRPWM channels 0 ePWM1A/2A/3A ePWM1A/2A/3A ePWM1A/2A/3A ePWM1A/2A/3A

4A/5A/6A 3A/4A 3A/4A

32-bit CAPTURE inputs or auxiliary PWM outputs 0 eCAP1/2/3/4 eCAP1/2/3/4 eCAP1/2/3/4 eCAP1/2 eCAP1/2 eCAP1/2 eCAP1/2

32-bit QEP channels (four inputs/channel) 0 eQEP1/2 eQEP1/2 eQEP1/2 eQEP1 eQEP1 eQEP1 eQEP1

Watchdog timer – Yes Yes Yes Yes Yes Yes Yes

12-Bit, 16-channel ADC conversion time 1 80 ns 160 ns 160 ns 160 ns 160 ns 160 ns 160 ns

32-Bit CPU timers – 3 3 3 3 3 3 3

Serial Peripheral Interface (SPI) 0 SPI-A/B/C/D SPI-A/B/C/D SPI-A/B/C/D SPI-A/B SPI-A/B SPI-A/B SPI-A/B

Serial Communications Interface (SCI) 0 SCI-A/B SCI-A/B SCI-A/B SCI-A SCI-A SCI-A SCI-A

Enhanced Controller Area Network (eCAN) 0 eCAN-A/B eCAN-A/B eCAN-A eCAN-A eCAN-A eCAN-A eCAN-A

Inter-Integrated Circuit (I2C) 0 I2C-A I2C-A I2C-A I2C-A I2C-A I2C-A I2C-A

Digital I/O pins (shared) – 35 35 35 35 35 35 35

External interrupts – 3 3 3 3 3 3 3

Supply voltage 1.8-V Core, 3.3-V I/O – Yes Yes Yes Yes Yes Yes Yes

100-Pin PZ – Yes Yes Yes Yes Yes Yes Yes

Packaging

100-Ball GGM, ZGM – Yes Yes Yes Yes Yes Yes Yes

A: –40°C to 85°C – (PZ, GGM, ZGM) (PZ, GGM, ZGM) (PZ, GGM, ZGM) (PZ, GGM, ZGM) (PZ, GGM, ZGM) (PZ, GGM, ZGM) (PZ, GGM, ZGM)

Temperature options S: –40°C to 125°C – (PZ, GGM, ZGM) (PZ, GGM, ZGM) (PZ, GGM, ZGM) (PZ, GGM, ZGM) (PZ, GGM, ZGM) (PZ, GGM, ZGM) (PZ, GGM, ZGM)

Q: –40°C to 125°C – (PZ) (PZ) (PZ) (PZ) (PZ) (PZ) (PZ)

Product status

(2)

– TMS TMS TMS TMS TMS TMS TMS

(1) A type change represents a major functional feature difference in a peripheral module. Within a peripheral type, there may be minor differences between devices that do not affect the

basic functionality of the module. These device-specific differences are listed in the TMS320x28xx, 28xxx DSP Peripheral Reference Guide (literature number SPRU566) and in the

peripheral reference guides.

(2) See Section 5.1, Device and Development Support Tool Nomenclature, for descriptions of device stages.

Submit Documentation Feedback

Product Folder Link(s): TMS320F2809 TMS320F2808 TMS320F2806 TMS320F2802 TMS320F2801 TMS320C2802

TMS320C2801 TMS320F28016 TMS320F28015