Datasheet

GPIO Signal
1
Sampling Window
Output From
Qualifier
1 1 1 1 1 1 1 1 1 1 10 0 0 0 0 0 0 0 0 0
SYSCLKOUT
QUALPRD = 1
(SYSCLKOUT/2)
(A)
GPxQSELn = 1,0 (6 samples)
[(SYSCLKOUT cycle * 2 * QUALPRD) * 5 ]
(C)
Sampling Period determined
by GPxCTRL[QUALPRD]
(B)
(D)
t
w(SP)
t
w(IQSW)
TMS320F28027, TMS320F28026, TMS320F28023, TMS320F28022
TMS320F28021, TMS320F28020, TMS320F280200
www.ti.com SPRS523J –NOVEMBER 2008–REVISED OCTOBER 2013
6.10.2 GPIO - Input Timing
Table 6-16. General-Purpose Input Timing Requirements
MIN MAX UNIT
QUALPRD = 0 1t
c(SCO)
cycles
t
w(SP)
Sampling period
QUALPRD ≠ 0 2t
c(SCO)
* QUALPRD cycles
t
w(IQSW)
Input qualifier sampling window t
w(SP)
* (n
(1)
– 1) cycles
Synchronous mode 2t
c(SCO)
cycles
t
w(GPI)
(2)
Pulse duration, GPIO low/high
With input qualifier t
w(IQSW)
+ t
w(SP)
+ 1t
c(SCO)
cycles
(1) "n" represents the number of qualification samples as defined by GPxQSELn register.
(2) For t
w(GPI)
, pulse width is measured from V
IL
to V
IL
for an active low signal and V
IH
to V
IH
for an active high signal.
A. This glitch will be ignored by the input qualifier. The QUALPRD bit field specifies the qualification sampling period. It
can vary from 00 to 0xFF. If QUALPRD = 00, then the sampling period is 1 SYSCLKOUT cycle. For any other value
"n", the qualification sampling period in 2n SYSCLKOUT cycles (that is, at every 2n SYSCLKOUT cycles, the GPIO
pin will be sampled).
B. The qualification period selected via the GPxCTRL register applies to groups of 8 GPIO pins.
C. The qualification block can take either three or six samples. The GPxQSELn Register selects which sample mode is
used.
D. In the example shown, for the qualifier to detect the change, the input should be stable for 10 SYSCLKOUT cycles or
greater. In other words, the inputs should be stable for (5 x QUALPRD x 2) SYSCLKOUT cycles. This would ensure
5 sampling periods for detection to occur. Since external signals are driven asynchronously, an 13-SYSCLKOUT-wide
pulse ensures reliable recognition.
Figure 6-11. Sampling Mode
Copyright © 2008–2013, Texas Instruments Incorporated Electrical Specifications 95
Submit Documentation Feedback
Product Folder Links: TMS320F28027 TMS320F28026 TMS320F28023 TMS320F28022 TMS320F28021
TMS320F28020 TMS320F280200