Datasheet

OUT
NC
IN
GND
EN
1
2
3
5
4
EN
N/C
N/C
6
5
4
IN
GND
OUT
1
2
3
TLV702xx
www.ti.com SLVSAG6B –SEPTEMBER 2010– REVISED FEBRUARY 2011
PIN CONFIGURATIONS
DBV PACKAGE
SOT23-5
(TOP VIEW)
DSE PACKAGE
1,5mm × 1,5mm SON-6
(TOP VIEW)
PIN DESCRIPTIONS
PIN SOT23-5 SON-6
NAME DBV DSE DESCRIPTION
Input pin. A small 1-μF ceramic capacitor is recommended from this pin to ground to assure stability and
IN 1 1 good transient performance. See Input and Output Capacitor Requirements in the Application Information
section for more details.
GND 2 2 Ground pin
Enable pin. Driving EN over 0.9 V turns on the regulator. Driving EN below 0.4 V puts the regulator into
shutdown mode and reduces operating current to 1 μA, nominal.
EN 3 6
For TLV702xxP, output voltage is discharged through an internal 120-Ω resistor when device is shut
down.
NC 4 4, 5 No connection. This pin can be tied to ground to improve thermal dissipation.
Regulated output voltage pin. A small 1-μF ceramic capacitor is needed from this pin to ground to assure
OUT 5 3 stability. See Input and Output Capacitor Requirements in the Application Information section for more
details.
© 2010–2011, Texas Instruments Incorporated Submit Documentation Feedback 5