Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLinear ICsLinear IC - Comparator Multi-purpose CMOS, Push pull, Rail-to-rail SOT 23 5

TLV3701

TLV3702

TLV3704

SLCS137B – NOVEMBER 2000 – REVISED AUGUST 2001

FAMILY OF NANOPOWER PUSH-PULL OUTPUT COMPARATORS

www.ti.com

FEATURES

Low Supply Current ...560 nA/Per Channel

D Input Common-Mode Range Exceeds the

Rails ...–0.1 V to V

+ 5 V

D Supply Voltage Range ...2.5 V to 16 V

D Reverse Battery Protection Up to 18 V

D Push-Pull CMOS Output Stage

D Specified Temperature Range

– 0°C to 70°C – Commercial Grade

– –40°C to 125°C – Industrial Grade

D Ultrasmall Packaging

– 5-Pin SOT-23 (TLV3701)

– 8-Pin MSOP (TLV3702)

D Universal Op-Amp EVM (Reference SLOU060

for more information)

APPLICATIONS

Portable Battery Monitoring

D Consumer Medical Electronics

D Security Detection Systems

DESCRIPTION

The TLV370x is Texas Instruments’ first family of

nanopower comparators with only 560 nA per channel

supply current, which make this device ideal for battery

power and wireless handset applications.

The TLV370x has a minimum operating supply voltage

of 2.7 V over the extended industrial temperature range

= –40°C to 125°C), while having an input

common-mode range of –0.1 to V

+ 5 V. The low

supply current makes it an ideal choice for battery

powered portable applications where quiescent current

is the primary concern. Reverse battery protection

guards the amplifier from an over-current condition due

to improper battery installation. For harsh

environments, the inputs can be taken 5 V above the

positive supply rail without damage to the device.

All members are available in PDIP and SOIC with the

singles in the small SOT-23 package, duals in the

MSOP, and quads in the TSSOP package.

600

100

– Supply Voltage – V

SUPPLY CURRENT

SUPPLY VOLTAGE

I Supply Current/Ch – nA–

200

300

400

500

700

800

2 4 6 8 10 12 14

= –1 V

= 125°C

= 25°C

= 70°C

= 0°C

= –40°C

TLV370X

µP

100 kΩ

1 MΩ

ref

high side voltage sense circuit

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

Summary of content (25 pages)

PAGE 1
TLV3701 TLV3702 TLV3704 SLCS137B – NOVEMBER 2000 – REVISED AUGUST 2001 FAMILY OF NANOPOWER PUSH-PULL OUTPUT COMPARATORS All members are available in PDIP and SOIC with the singles in the small SOT-23 package, duals in the MSOP, and quads in the TSSOP package. FEATURES D Low Supply Current . . . 560 nA/Per Channel D Input Common-Mode Range Exceeds the D D SUPPLY CURRENT vs SUPPLY VOLTAGE 800 TA = 125°C I CC – Supply Current/Ch – nA D D D D Rails . . . –0.1 V to VCC + 5 V Supply Voltage Range . . . 2.
PAGE 2
TLV3701 TLV3702 TLV3704 SLCS137B – NOVEMBER 2000 – REVISED AUGUST 2001 A SELECTION OF OUTPUT COMPARATORS† DEVICE VCC (V) VIO (µV) ICC/Ch (µA) IIB (pA) tPLH (µs) tPHL (µs) tf (µs) tr (µs) RAIL-TORAIL OUTPUT STAGE TLV370x 2.5 – 16 250 0.56 80 56 83 22 8 I PP TLV340x 2.5 – 16 250 0.47 80 55 30 5 – I OD TLC3702/4 3 – 16 1200 9 5 1.1 0.65 0.5 0.125 – PP TLC393/339 3 – 16 1400 11 5 1.1 0.55 0.
PAGE 3
TLV3701 TLV3702 TLV3704 SLCS137B – NOVEMBER 2000 – REVISED AUGUST 2001 TLV3701 D OR P PACKAGE (TOP VIEW) TLV3701 DBV PACKAGE (TOP VIEW) OUT GND IN+ 1 5 VCC 2 3 4 IN – NC IN – IN + GND 1 8 2 7 3 6 4 5 TLV3702 D, DGK, OR P PACKAGE (TOP VIEW) NC VCC OUT NC 1OUT 1IN – 1IN + GND 1 8 2 7 3 6 4 5 VCC 2OUT 2IN – 2IN+ TLV3704 D, N, OR PW PACKAGE (TOP VIEW) 1OUT 1IN – 1IN+ VCC 2IN+ 2IN – 2OUT 1 14 2 13 3 12 4 11 5 10 6 9 7 8 4OUT 4IN – 4IN+ GND 3IN+ 3IN – 3OUT absolute m
PAGE 4
TLV3701 TLV3702 TLV3704 SLCS137B – NOVEMBER 2000 – REVISED AUGUST 2001 DISSIPATION RATING TABLE PACKAGE θJC (°C/W) θJA (°C/W) TA ≤ 25°C POWER RATING TA = 125°C POWER RATING D (8) 38.3 176 710 mW 142 mW D (14) 26.9 122.6 1022 mW 204.4 mW DBV (5) 55 324.1 385 mW 77.1 mW DGK (8) 54.2 259.9 481 mW 96.2 mW N (14) 32 78 1600 mW 320.5 mW P (8) 41 104 1200 mW 240.4 mW PW (14) 29.3 173.
PAGE 5
TLV3701 TLV3702 TLV3704 SLCS137B – NOVEMBER 2000 – REVISED AUGUST 2001 electrical characteristics at specified operating free-air temperature, VCC = 2.
PAGE 6
TLV3701 TLV3702 TLV3704 SLCS137B – NOVEMBER 2000 – REVISED AUGUST 2001 switching characteristics at recommended operating conditions, VCC = 2.7 V, 5 V, 15 V, TA = 25°C (unless otherwise noted) PARAMETER t(PLH) t(PHL) tr TEST CONDITIONS Propagation P ti response titime, llow-to-high-level t hi h l l output (see Note 3) P ti response titime, hi ht l l l Propagation high-to-low-level output (see Note 3) Rise time f = 10 kHz, kHz VSTEP = 100 mV, CL = 10 pF, VCC = 2.
PAGE 7
TLV3701 TLV3702 TLV3704 SLCS137B – NOVEMBER 2000 – REVISED AUGUST 2001 TYPICAL CHARACTERISTICS HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT TA = –40°C TA = 0°C 1.8 1.5 TA = 25°C 1.2 0.9 TA = 70°C 0.6 0.3 TA = 125°C 0.0 4.5 4 TA = 125°C 3.5 TA = 70°C 3 2.5 2 TA = 25°C 1.5 TA = 0°C 1 TA = –40°C 0.5 0 IOH – High-Level Output Current – mA 0.4 0.8 1.6 2.0 2.4 TA = 25°C 6 4.5 TA = 0°C 3 TA = –40°C 1.5 0 1 2 3 4 2 TA = 70°C 1.5 1 TA = 125°C 0.5 0 0.2 0.
PAGE 8
TLV3701 TLV3702 TLV3704 SLCS137B – NOVEMBER 2000 – REVISED AUGUST 2001 TYPICAL CHARACTERISTICS 2 mV 10 mV 0 VCC = 2.7 V CL = 10 pF TA = 25°C –0.10 –0.15 25 50 75 100125150175200225250275300 VCC = 2.7 V CL = 10 pF TA = 25°C 0.05 0 –0.05 0 25 50 75 100125150175200225250275300 Figure 12 Figure 13 LOW-TO-HIGH LEVEL OUTPUT RESPONSE FOR VARIOUS INPUT OVERDRIVES HIGH-TO-LOW LEVEL OUTPUT RESPONSE FOR VARIOUS INPUT OVERDRIVES 6 5 4 50 mV 3 2 mV 10 mV 2 1 –0.05 –0.10 –0.
PAGE 9
PACKAGE OPTION ADDENDUM www.ti.
PAGE 10
PACKAGE OPTION ADDENDUM www.ti.
PAGE 11
PACKAGE OPTION ADDENDUM www.ti.
PAGE 12
PACKAGE OPTION ADDENDUM www.ti.com 11-Apr-2013 Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) Multiple Top-Side Markings will be inside parentheses.
PAGE 13
PACKAGE MATERIALS INFORMATION www.ti.com 26-Jan-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) TLV3701CDBVR SOT-23 DBV 5 3000 180.0 9.0 TLV3701CDBVT SOT-23 DBV 5 250 180.0 TLV3701IDBVR SOT-23 DBV 5 3000 180.
PAGE 14
PACKAGE MATERIALS INFORMATION www.ti.com 26-Jan-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TLV3701CDBVR SOT-23 DBV 5 3000 182.0 182.0 20.0 TLV3701CDBVT SOT-23 DBV 5 250 182.0 182.0 20.0 TLV3701IDBVR SOT-23 DBV 5 3000 182.0 182.0 20.0 TLV3701IDBVT SOT-23 DBV 5 250 182.0 182.0 20.0 TLV3701IDR SOIC D 8 2500 340.5 338.1 20.6 TLV3702CDGKR VSSOP DGK 8 2500 358.0 335.0 35.
PAGE 15
PAGE 16
PAGE 17
PAGE 18
PAGE 19
PAGE 20
PAGE 21
PAGE 22
PAGE 23
PAGE 24
PAGE 25
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.