Datasheet
TLV320AIC33
SLAS480B – JANUARY 2006 – REVISED DECEMBER 2008 ...........................................................................................................................................
www.ti.com
Page 0 / Register 23: LINE2R to Right ADC Control Register
BIT READ/ RESET DESCRIPTION
WRITE VALUE
D7 R/W 0 LINE2R Single-Ended vs Fully Differential Control
If LINE2R is selected to both left and right ADC channels, both connections must use the same
configuration (single-ended or fully differential mode).
0: LINE2R is configured in single-ended mode
1: LINE2R is configured in fully differential mode
D6 – D3 R/W 1111 LINE2R Input Level Control for Right ADC PGA Mix
Setting the input level control to a gain below automatically connects LINE2R to the right ADC PGA mix
0000: Input level control gain = 0.0-dB
0001: Input level control gain = - – 1.5-dB
0010: Input level control gain = – 3.0-dB
0011: Input level control gain = – 4.5-dB
0100: Input level control gain = – 6.0-dB
0101: Input level control gain = – 7.5-dB
0110: Input level control gain = – 9.0-dB
0111: Input level control gain = – 10.5-dB
1000: Input level control gain = – 12.0-dB
1001-1110: Reserved. Do not write these sequences to these register bits
1111: LINE2R is not connected to the right ADC PGA
D2 R/W 0 Right ADC Channel Weak Common-Mode Bias Control
0: Right ADC channel unselected inputs are not biased weakly to the ADC common-mode voltage
1: Right ADC channel unselected inputs are biased weakly to the ADC common- mode voltage
D1 – D0 R 00 Reserved. Write only zeros to these register bits
Page 0 / Register 24: LINE1L to Right ADC Control Register
BIT READ/ RESET DESCRIPTION
WRITE VALUE
D7 R/W 0 LINE1L Single-Ended vs Fully Differential Control
If LINE1L is selected to both left and right ADC channels, both connections must use the same
configuration (single-ended or fully differential mode).
0: LINE1L is configured in single-ended mode
1: LINE1L is configured in fully differential mode
D6 – D3 R/W 1111 LINE1L Input Level Control for Right ADC PGA Mix
Setting the input level control to a gain below automatically connects LINE1L to the right ADC
PGA mix
0000: Input level control gain = 0.0-dB
0001: Input level control gain = – 1.5-dB
0010: Input level control gain = – 3.0-dB
0011: Input level control gain = – 4.5-dB
0100: Input level control gain = – 6.0-dB
0101: Input level control gain = – 7.5-dB
0110: Input level control gain = – 9.0-dB
0111: Input level control gain = – 10.5-dB
1000: Input level control gain = – 12.0-dB
1001 – 1110: Reserved. Do not write these sequences to these register bits
1111: LINE1L is not connected to the right ADC PGA
D2 – D0 R 000 Reserved. Write only zeros to these register bits.
Page 0 / Register 25: MICBIAS Control Register
BIT READ/ RESET DESCRIPTION
WRITE VALUE
D7 – D6 R/W 00 MICBIAS Level Control
00: MICBIAS output is powered down
01: MICBIAS output is powered to 2.0 V
10: MICBIAS output is powered to 2.5 V
11: MICBIAS output is connected to AVDD
D5 – D3 R 000 Reserved. Write only zeros to these register bits.
D2 – D0 R XXX Reserved. Write only zeros to these register bits.
54 Submit Documentation Feedback Copyright © 2006 – 2008, Texas Instruments Incorporated
Product Folder Link(s): TLV320AIC33