Datasheet
TLV320AIC33
www.ti.com
........................................................................................................................................... SLAS480B – JANUARY 2006 – REVISED DECEMBER 2008
Page 0 / Register 17: MIC3L/R to Left ADC Control Register (continued)
BIT READ/ RESET DESCRIPTION
WRITE VALUE
D3-D0 R/W 1111 MIC3R Input Level Control for Left ADC PGA Mix
Setting the input level control to a gain below automatically connects MIC3R to the left ADC PGA
mix
0000: Input level control gain = 0.0-dB
0001: Input level control gain = – 1.5-dB
0010: Input level control gain = – 3.0-dB
0011: Input level control gain = – 4.5-dB
0100: Input level control gain = – 6.0-dB
0101: Input level control gain = – 7.5-dB
0110: Input level control gain = – 9.0-dB
0111: Input level control gain = – 10.5-dB
1000: Input level control gain = – 12.0-dB
1001 – 1110: Reserved. Do not write these sequences to these register bits
1111: MIC3R is not connected to the left ADC PGA
Page 0 / Register 18: MIC3L/R to Right ADC Control Register
BIT READ/ RESET DESCRIPTION
WRITE VALUE
D7 – D4 R/W 1111 MIC3L Input Level Control for Right ADC PGA Mix
Setting the input level control to a gain below automatically connects MIC3L to the right ADC
PGA mix
0000: Input level control gain = 0.0-dB
0001: Input level control gain = – 1.5-dB
0010: Input level control gain = – 3.0-dB
0011: Input level control gain = – 4.5-dB
0100: Input level control gain = – 6.0-dB
0101: Input level control gain = – 7.5-dB
0110: Input level control gain = – 9.0-dB
0111: Input level control gain = – 10.5-dB
1000: Input level control gain = – 12.0-dB
1001 – 1110: Reserved. Do not write these sequences to these register bits
1111: MIC3L is not connected to the right ADC PGA
D3 – D0 R/W 1111 MIC3R Input Level Control for Right ADC PGA Mix
Setting the input level control to a gain below automatically connects MIC3R to the right ADC
PGA mix
0000: Input level control gain = 0.0-dB
0001: Input level control gain = – 1.5-dB
0010: Input level control gain = – 3.0-dB
0011: Input level control gain = – 4.5-dB
0100: Input level control gain = – 6.0-dB
0101: Input level control gain = – 7.5-dB
0110: Input level control gain = – 9.0-dB
0111: Input level control gain = – 10.5-dB
1000: Input level control gain = – 12.0-dB
1001 – 1110: Reserved. Do not write these sequences to these register bits
1111: MIC3R is not connected to right ADC PGA
Page 0 / Register 19: LINE1L to Left ADC Control Register
BIT READ/ RESET DESCRIPTION
WRITE VALUE
D7 R/W 0 LINE1L Single-Ended vs Fully Differential Control
If LINE1L is selected to both left and right ADC channels, both connections must use the same
configuration (single-ended or fully differential mode).
0: LINE1L is configured in single-ended mode
1: LINE1L is configured in fully differential mode
Copyright © 2006 – 2008, Texas Instruments Incorporated Submit Documentation Feedback 51
Product Folder Link(s): TLV320AIC33