Datasheet

     
  
  
SLOS081G − FEBRUARY 1977 − REVISED SEPTEMBER 2004
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
†
TL08_C
TL08_AC
TL08_BC
TL08_I TL084Q TL08_M UNIT
Supply voltage, V
CC+
(see Note 1) 18 18 18 18 V
Supply voltage V
CC
− (see Note 1) −18 −18 −18 −18 V
Differential input voltage, V
ID
(see Note 2) ± 30 ± 30 ± 30 ± 30 V
Input voltage, V
I
(see Notes 1 and 3) ±15 ± 15 ±15 ± 15 V
Duration of output short circuit (see Note 4) Unlimited Unlimited Unlimited Unlimited
Continuous total power dissipation See Dissipation Rating Table
Operating free-air temperature range, T
A
0 to 70 − 40 to 85 − 40 to 125 − 55 to 125 °C
D package (8-pin) 97 97
D package (14-pin) 86 86
N package (14-pin) 76 76
Package thermal impedance,
θ
JA
NS package (14-pin) 80
°C/W
Package thermal impedance, θ
JA
(see Notes 5 and 6)
P package (8-pin) 85 85
°C/W
(see Notes 5 and 6)
PS package (8-pin) 95 95
PW package (8-pin) 149
PW package (14-pin) 113 113
Operating virtual junction temperature 150 150 150 150 °C
Case temperature for 60 seconds, T
C
FK package 260 °C
Lead temperature 1,6 mm (1/16 inch) from case
for 60 seconds
J or JG package 300 °C
Storage temperature range, T
stg
− 65 to 150 − 65 to 150 − 65 to 150 − 65 to 150 °C
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between V
CC+
and V
CC−
.
2. Differential voltages are at IN+ with respect to IN−.
3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less.
4. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the
dissipation rating is not exceeded.
5. Maximum power dissipation is a function of T
J
(max), θ
JA
, and T
A
. The maximum allowable power dissipation at any allowable
ambient temperature is P
D
= (T
J
(max) − T
A
)/θ
JA
. Operating at the absolute maximum T
J
of 150°C can affect reliability.
6. The package thermal impedance is calculated in accordance with JESD 51-7.
DISSIPATION RATING TABLE
PACKAGE
T
A
≤ 25°C
POWER RATING
DERATING
FACTOR
DERATE
ABOVE T
A
T
A
= 70°C
POWER RATING
T
A
= 85°C
POWER RATING
T
A
= 125°C
POWER RATING
D (14 pin) 680 mW 7.6 mW/°C 60°C 604 mW 490 mW 186 mW
FK 680 mW 11.0 mW/°C88°C 680 mW 680 mW 273 mW
J 680 mW 11.0 mW/°C88°C 680 mW 680 mW 273 mW
JG 680 mW 8.4 mW/°C 69°C 672 mW 546 mW 210 mW