Application Guide

126 Alphabetical Listing
normCdf()
Catalog >
normCdf(lowBound,upBound[,μ[,σ]]) ⇒
number if lowBound and upBound are
numbers, list if lowBound and upBound are
lists
Computes the normal distribution probability
between lowBound and upBound for the
specified μ (default=0) and σ (default=1).
For P(X ≤ upBound), set lowBound = ⁻∞.
normPdf()
Catalog >
normPdf(XVal[,μ[,σ]]) ⇒ number if XVal is
a number, list if XVal is a list
Computes the probability density function
for the normal distribution at a specified
XVal value for the specified μ and σ.
not
Catalog >
not BooleanExpr ⇒ Boolean expression
Returns true, false, or a simplified form of
the argument.
not Integer1 ⇒ integer
Returns the one’s complement of a real
integer. Internally, Integer1 is converted to
a signed, 64-bit binary number. The value of
each bit is flipped (0 becomes 1, and vice
versa) for the one’s complement. Results
are displayed according to the Base mode.
You can enter the integer in any number
base. For a binary or hexadecimal entry, you
must use the 0b or 0h prefix, respectively.
Without a prefix, the integer is treated as
decimal (base10).
If you enter a decimal integer that is too
large for a signed, 64-bit binary form, a
symmetric modulo operation is used to
bring the value into the appropriate range.
For more information, see ►Base2, page
17.
In Hex base mode:
Important: Zero, not the letter O.
In Bin base mode:
To see the entire result, press £ and then
use ¡and¢ to move the cursor.
Note: A binary entry canhave up to 64 digits
(not counting the 0b prefix). A hexadecimal
entry can have up to 16 digits.