User's Manual

Checking the LEDs

Three LEDs (small lights) at the top of each hub blink or change colors to

indicate various operations or status.

The LED indicates whether the hub is configured. The LED indicates

network activity. The LED indicates battery-charging status.

When the network hubs are still in the charging bay:

• The LED blinking in a green-amber-red sequence means the hubs

are currently recharging.

• A solid green LED means the hub is fully charged.

A complete list of LED operations and status modes is available, along

with complete information about the network hubs’ rechargable

batteries and how to store the hubs.

Before you begin

To install software on your computer, you must have administrator

privileges when you log in to Windows

. If you don’t know whether or

not you have administrator privileges, check with your school’s help desk

or system administrator.

Installing

1. Insert the TI-Navigator™ CD in your computer’s CD-ROM drive. The

window to the CD should open automatically.

LEDs