Datasheet

 
   

SLOS237B− MAY 1999 − REVISED FEBRUARY 2000
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
DISSIPATION RATING TABLE
PACKAGE
θ
JA
θ
JC
T
A
= 25
°
C
PACKAGE
θ
JA
(°C/W)
θ
JC
(°C/W)
T
A
= 25 C
POWER RATING
D 167
†
38.3 740 mW
DGN
‡
58.4 4.7 2.14 W
†
This data was taken using the JEDEC standard Low-K test PCB. For the JEDEC proposed
High-K test PCB, the θ
JA
is 95°C/W with a power rating at T
A
= 25°C of 1.32 W.
‡
This data was taken using 2 oz. trace and copper pad that is soldered directly to a 3 in. × 3 in.
PC. For further information, refer to Application Information section of this data sheet.
recommended operating conditions
MIN NOM MAX UNIT
Supply voltage, V
CC+
and V
CC−
Dual supply ±4.5 ±16
V
Supply voltage, V
CC+
and V
CC−
Single supply 9 32
V
Operating free-air temperature, T
A
C-suffix 0 70
°C
Operating free-air temperature, T
A
I-suffix −40 85
°C
electrical characteristics at T
A
= 25°C, V
CC
= ±15 V, R
L
= 150 Ω (unless otherwise noted)
dynamic performance
PARAMETER TEST CONDITIONS
†
MIN TYP MAX UNIT
V
CC
= ±15 V R
f
= 200 Ω
Gain = 1
165
MHz
Dynamic performance small-signal bandwidth
V
CC
= ±5 V R
f
= 200 Ω
Gain = 1
150
MHz
Dynamic performance small-signal bandwidth
(−3 dB)
V
CC
= ±15 V R
f
= 1.3 kΩ
Gain = 2
60
MHz
BW
(−3 dB)
V
CC
= ±5 V R
f
= 1.3 kΩ
Gain = 2
60
MHz
BW
Bandwidth for 0.1 dB flatness
V
CC
= ±15 V R
f
= 200 Ω
Gain = 1
45
MHz
Bandwidth for 0.1 dB flatness
V
CC
= ±5 V R
f
= 200 Ω
Gain = 1
45
MHz
Full power bandwidth
§
V
O(pp)
= 20 V, V
CC
= ±15 V 6.3
MHz
Full power bandwidth
§
V
O(pp)
= 5 V, V
CC
= ±5 V 20
MHz
SR
Slew rate
‡
V
CC
= ±15 V, 20-V step, Gain = 5 400
V/ s
SR
Slew rate
‡
V
CC
= ±5 V, 5-V step, Gain = −1 325
V/µs
Settling time to 0.1%
V
CC
= ±15 V, 5-V step
Gain = −1
120
ns
t
s
Settling time to 0.1%
V
CC
= ±5 V, 2-V step
Gain = −1
120
ns
t
s
Settling time to 0.01%
V
CC
= ±15 V, 5-V step
Gain = −1
250
ns
Settling time to 0.01%
V
CC
= ±5 V, 2-V step
Gain = −1
280
ns
†
Full range = 0°C to 70°C for C suffix and −40°C to 85°C for I suffix
‡
Slew rate is measured from an output level range of 25% to 75%.
§
Full power bandwidth = slew rate / 2 π V
O(Peak)
.