Datasheet

|V
ID
|
2
|V
ID
|
2
SN75LVDS82
SLLS259I –NOVEMBER 1996–REVISED APRIL 2011 www.ti.com
ABSOLUTE MAXIMUM RATINGS
(1)
over operating free-air temperature range (unless otherwise noted)
UNIT
V
CC
Supply voltage range
(2)
–0.5 V to 4 V
V
O
Output voltage range (Dxx terminals) –0.5 V to V
CC
+ 0.5 V
Any terminal except SHTDN –0.5 V to V
CC
+ 0.5 V
V
I
Input voltage range
SHTDN –0.5 V to 5.5 V
Continuous total power dissipation See Dissipation Rating Table
T
A
Operating temperature range 0°C to 70°C
T
stg
Storage temperature range –65°C to 150°C
Lead temperature 1,6 mm (1/16 in) from case for 10 s 260°C
(1) Stresses beyond those listed under "absolute maximum ratings” may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to GND, unless otherwise noted.
DISSIPATION RATING TABLE
T
A
≤ 25°C DERATING FACTOR
(1)
T
A
= 70°C
PACKAGE
POWER RATING ABOVE T
A
= 25°C POWER RATING
DGG 1377 mW 11.0 mW/°C 822 mW
(1) This is the inverse of the junction-to-ambient thermal resistance when board mounted and with no air
flow.
RECOMMENDED OPERATING CONDITIONS
MIN NOM MAX UNIT
V
CC
Supply voltage 3 3.3 3.6 V
V
IH
High-level input voltage (SHTDN) 2 V
V
IL
Low-level input voltage (SHTDN) 0.8 V
|V
ID
| Differential input voltage 0.1 0.6 V
2.4 -
V
IC
Common-mode input voltage (see Figure 2 and Figure 3) V
V
CC
– 0.8
T
A
Operating free-air temperature 0 70 °C
TIMING REQUIREMENTS
MIN MAX UNIT
t
c
Cycle time, input clock
(1)
14.7 32.3 ns
t
su1
Setup time, input (see Figure 7) 600 ps
t
h1
Hold time, input (see Figure 7) 600 ps
(1) Parameter t
c
is defined as the mean duration of a minimum of 32000 clock cycles.
4 Copyright © 1996–2011, Texas Instruments Incorporated