Datasheet
www.ti.com
PACKAGE DISSIPATION RATINGS
ABSOLUTE MAXIMUM RATINGS
RECOMMENDED OPERATING CONDITIONS
SN65MLVD201 , SN65MLVD203
SN65MLVD206 , SN65MLVD207
SLLS558C – DECEMBER 2002 – REVISED JANUARY 2007
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ORDERING INFORMATION
PART NUMBER
(1)
FOOTPRINT RECEIVER TYPE PACKAGE MARKING
SN65MLVD201D SN75176 Type 1 MF201
SM65MLVD203D SN75ALS180 Type 1 MLVD203
SN65MLVD206D SN75176 Type 2 MF206
SM65MLVD207D SN75ALS180 Type 2 MLVD207
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com .
T
A
≤ 25 ° C DERATING FACTOR T
A
= 85 ° C
PACKAGE
POWER RATING ABOVE T
A
= 25 ° C POWER RATING
D(8) 725 mW 5.8 mW/ ° C 377 mW
D(14) 950 mW 7.6 mW/ ° C 494 mw
over operating free-air temperature range (unless otherwise noted)
(1)
VALUE / UNIT
Supply voltage range
(2)
, V
CC
– 0.5 V to 4 V
D, DE, RE – 0.5 V to 4 V
Input voltage range A, B (201, 206) – 1.8 V to 4 V
A, B (203, 207) – 4 V to 6 V
R – 0.3 V to 4 V
Output voltage range
Y, Z, A, or B – 1.8 V to 4 V
A, B, Y, and Z ± 8 kV
Human Body Model
(3)
Electrostatic discharge All pins ± 2 kV
Charged-Device Model
(4)
All pins ± 1500 V
Continuous power dissipation See Dissipation Rating Table
Storage temperature range – 65 ° C to 150 ° C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential I/O bus voltages, are with respect to network ground terminal.
(3) Tested in accordance with JEDEC Standard 22, Test Method A114-A.
(4) Tested in accordance with JEDEC Standard 22, Test Method C101.
MIN NOM MAX UNIT
V
CC
Supply voltage 3 3.3 3.6 V
V
IH
High-level input voltage 2 V
CC
V
V
IL
Low-level input voltage GND 0.8 V
Voltage at any bus terminal V
A
, V
B,
V
Y
or V
Z
– 1.4 3.8 V
|V
ID
| Magnitude of differential input voltage 0.05 V
CC
V
T
A
Operating free-air temperature – 40 85 ° C
2 Submit Documentation Feedback Copyright © 2002 – 2007, Texas Instruments Incorporated
Product Folder Link(s): SN65MLVD201 SN65MLVD203 SN65MLVD206 SN65MLVD207