Datasheet

SN65LVDS33, SN65LVDT33
SN65LVDS34, SN65LVDT34
SLLS490B –MARCH 2001–REVISED NOVEMBER 2004 www.ti.com
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range (unless otherwise noted)
(1)
UNIT
Supply voltage range, V
CC
(2)
–0.5 V to 4 V
Enables or Y –1 V to 6 V
Voltage range A or B –5 V to 6 V
|V
A
– V
B
| (LVDT) 1 V
Electrostatic discharge A, B, and GND
(3)
Class 3, A: 15 kV, B: 500 V
Charged-device mode All pins
(4)
±500 V
Continuous power dissipation See Dissipation Rating Table
Storage temperature range –65°C to 150°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential I/O bus voltages, are with respect to network ground terminal.
(3) Tested in accordance with JEDEC Standard 22, Test Method A114-A.
(4) Tested in accordance with JEDEC Standard 22, Test Method C101.
DISSIPATION RATING TABLE
T
A
≤ 25°C OPERATING FACTOR
(1)
T
A
= 85°C
PACKAGE
POWER RATING ABOVE T
A
= 25°C POWER RATING
D8 725 mW 5.8 mW/°C 377 mW
PW16 774 mW 6.2 mW/°C 402 mW
D16 950 mW 7.6 mW/°C 494 mW
(1) This is the inverse of the junction-to-ambient thermal resistance when board-mounted and with no air
flow.
RECOMMENDED OPERATING CONDITIONS
MIN NOM MAX UNIT
V
CC
Supply voltage 3 3.3 3.6 V
V
IH
High-level input voltage Enables 2 5 V
V
IL
Low-level input voltage Enables 0 0.8 V
LVDS 0.1 3
| V
ID
| Magnitude of differential input voltage V
LVDT 0.8
V
I
or V
IC
Voltage at any bus terminal (separately or common-mode) –4 5 V
T
A
Operating free-air temperature –40 85 °C
4 Submit Documentation Feedback Copyright © 2001–2004, Texas Instruments Incorporated
Product Folder Link(s): SN65LVDS33 SN65LVDT33 SN65LVDS34 SN65LVDT34