Datasheet

SN65HVD30-EP, SN65HVD31-EP, SN65HVD32-EP
SN65HVD33-EP, SN65HVD34-EP, SN65HVD35-EP
SGLS367D –SEPTEMBER 2006–REVISED MARCH 2012 www.ti.com
Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
MIN NOM MAX UNIT
V
CC
Supply voltage 3 3.6 V
V
I
or V
IC
Voltage at any bus terminal (separately or common mode) –7
(1)
12 V
'HVD30, 'HVD33 25
1/t
UI
Signaling rate 'HVD31, 'HVD34 5 Mbps
'HVD32, 'HVD35 1
R
L
Differential load resistance 54 60 Ω
V
IH
High-level input voltage D, DE, RE 2 V
CC
V
V
IL
Low-level input voltage D, DE, RE 0 0.8 V
V
ID
Differential input voltage –12 12 V
Driver –60
I
OH
High-level output current mA
Receiver –8
Driver 60
I
OL
Low-level output current mA
Receiver 8
T
A
Ambient still-air temperature –55 125
(2)
°C
(1) The algebraic convention, in which the least positive (most negative) limit is designated as minimum, is used in this data sheet.
(2) Long-term high-temperature storage and/or extended use at maximum recommended operating conditions may result in a reduction of
overall device life. See http://www.ti.com/ep_quality for additional information on enhanced plastic packaging.
Electrostatic Discharge Protection
PARAMETER TEST CONDITIONS TYP
(1)
UNIT
Human-Body Model Bus terminals and GND ±16
Human-Body Model
(2)
All pins ±4 kV
Charged-Device Model
(3)
All pins ±1
(1) All typical values at 25°C with 3.3-V supply
(2) Tested in accordance with JEDEC Standard 22, Test Method A114-A
(3) Tested in accordance with JEDEC Standard 22, Test Method C101
4 Submit Documentation Feedback Copyright © 2006–2012, Texas Instruments Incorporated
Product Folder Link(s): SN65HVD30-EP SN65HVD31-EP SN65HVD32-EP SN65HVD33-EP SN65HVD34-EP
SN65HVD35-EP