Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLinear ICsLinear IC - Op-amp Multi-purpose SOIC 8

NE5534, NE5534A, SA5534. SA5534A

LOW-NOISE OPERATIONAL AMPLIFIERS

SLOS070C − JULY 1979 − REVISED SEPTEMBER 2004

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

D Equivalent Input Noise Voltage . . .

3.5 nV//Hz

Typ

D Unity-Gain Bandwidth . . . 10 MHz Typ

D Common-Mode Rejection Ratio . . .

100 dB Typ

D High DC Voltage Gain . . . 100 V/mV Typ

D Peak-to-Peak Output Voltage Swing

32 V Typ With V

= +18 V and R

= 600 W

D High Slew Rate . . . 13 V/ms Typ

D Wide Supply-Voltage Range +3 V to +20 V

D Low Harmonic Distortion

D Offset Nulling Capability

D External Compensation Capability

description/ordering information

The NE5534, NE5534A, SA5534, and SA5534A are high-performance operational amplifiers combining

excellent dc and ac characteristics. Some of the features include very low noise, high output-drive capability,

high unity-gain and maximum-output-swing bandwidths, low distortion, and high slew rate.

These operational amplifiers are compensated internally for a gain equal to or greater than three. Optimization

of the frequency response for various applications can be obtained by use of an external compensation

capacitor between COMP and COMP/BAL. The devices feature input-protection diodes, output short-circuit

protection, and offset-voltage nulling capability with use of the BALANCE and COMP/BAL pins (see the

application circuit diagram).

For the NE5534A and SA5534A, a maximum limit is specified for the equivalent input noise voltage.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

BALANCE

IN−

IN+

CC−

COMP/BAL

CC+

OUT

COMP

NE5534, SA5534 ...D (SOIC), P (PDIP),

OR PS (SOP) PACKAGE

NE5534A, SA5534A ...D (SOIC) OR P (PDIP) PACKAGE

(TOP VIEW)

Summary of content (19 pages)

PAGE 1
NE5534, NE5534A, SA5534. SA5534A LOW-NOISE OPERATIONAL AMPLIFIERS SLOS070C − JULY 1979 − REVISED SEPTEMBER 2004 D Equivalent Input Noise Voltage . . . D D D D D D D D D 3.5 nV//Hz Typ Unity-Gain Bandwidth . . . 10 MHz Typ Common-Mode Rejection Ratio . . . 100 dB Typ High DC Voltage Gain . . . 100 V/mV Typ Peak-to-Peak Output Voltage Swing 32 V Typ With VCC+ = +18 V and RL = 600 W High Slew Rate . . .
PAGE 2
NE5534, NE5534A, SA5534.
PAGE 3
NE5534, NE5534A, SA5534. SA5534A LOW-NOISE OPERATIONAL AMPLIFIERS SLOS070C − JULY 1979 − REVISED SEPTEMBER 2004 symbol application circuit VCC+ 22 kΩ COMP 100 kΩ COMP/BAL IN− CC 1 − OUT IN+ 2 + 8 − 5 7 5534 6 BALANCE 3 + 4 VCC− Frequency Compensation and Offset-Voltage Nulling Circuit absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage: VCC+ (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 4
NE5534, NE5534A, SA5534.
PAGE 5
NE5534, NE5534A, SA5534.
PAGE 6
NE5534, NE5534A, SA5534. SA5534A LOW-NOISE OPERATIONAL AMPLIFIERS SLOS070C − JULY 1979 − REVISED SEPTEMBER 2004 NORMALIZED INPUT BIAS CURRENT AND INPUT OFFSET CURRENT vs FREE-AIR TEMPERATURE VO(PP) VOPP − Maximum Peak-to-Peak Output Voltage − V Normalized Input Bias Current and Input Offset Current TYPICAL CHARACTERISTICS† 1.6 VCC± = ±15 V 1.4 Offset 1.2 Bias 1 0.8 0.6 0.
PAGE 7
NE5534, NE5534A, SA5534. SA5534A LOW-NOISE OPERATIONAL AMPLIFIERS SLOS070C − JULY 1979 − REVISED SEPTEMBER 2004 TYPICAL CHARACTERISTICS† NORMALIZED SLEW RATE AND UNITY-GAIN BANDWIDTH vs FREE-AIR TEMPERATURE TOTAL HARMONIC DISTORTION vs FREQUENCY 0.01 VCC± = ±15 V 1.1 THD − Total Harmonic Distortion − % Normalized Slew Rate and Unity-Gain Bandwidth 1.2 Slew Rate Unity-Gain Bandwidth 1 0.9 0.8 −75 −50 75 100 −25 0 25 50 TA − Free-Air Temperature − °C 0.
PAGE 8
NE5534, NE5534A, SA5534. SA5534A LOW-NOISE OPERATIONAL AMPLIFIERS SLOS070C − JULY 1979 − REVISED SEPTEMBER 2004 TYPICAL CHARACTERISTICS TOTAL EQUIVALENT INPUT NOISE VOLTAGE vs SOURCE RESISTANCE Total Equivalent Input Noise Voltage − μV 100 70 40 VCC± = ±15 V TA = 25°C 20 10 7 4 f = 10 Hz to 20 kHz 2 1 0.7 0.4 f = 200 Hz to 4 kHz 0.2 0.
PAGE 9
PACKAGE OPTION ADDENDUM www.ti.
PAGE 10
PACKAGE OPTION ADDENDUM www.ti.
PAGE 11
PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 11-Apr-2013 Status (1) SA5534PSRG4 ACTIVE Package Type Package Pins Package Drawing Qty SO PS 8 2000 Eco Plan Lead/Ball Finish (2) Green (RoHS & no Sb/Br) MSL Peak Temp Op Temp (°C) Top-Side Markings (3) CU NIPDAU Level-1-260C-UNLIM (4) -40 to 85 SA5534 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs.
PAGE 12
PACKAGE MATERIALS INFORMATION www.ti.com 26-Jan-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant NE5534ADR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 NE5534DR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 SA5534ADR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 SA5534DR SOIC D 8 2500 330.0 12.
PAGE 13
PACKAGE MATERIALS INFORMATION www.ti.com 26-Jan-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) NE5534ADR SOIC D 8 2500 340.5 338.1 20.6 NE5534DR SOIC D 8 2500 340.5 338.1 20.6 SA5534ADR SOIC D 8 2500 340.5 338.1 20.6 SA5534DR SOIC D 8 2500 340.5 338.1 20.6 SA5534PSR SO PS 8 2000 367.0 367.0 38.
PAGE 14
MECHANICAL DATA MCER001A – JANUARY 1995 – REVISED JANUARY 1997 JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE 0.400 (10,16) 0.355 (9,00) 8 5 0.280 (7,11) 0.245 (6,22) 1 0.063 (1,60) 0.015 (0,38) 4 0.065 (1,65) 0.045 (1,14) 0.310 (7,87) 0.290 (7,37) 0.020 (0,51) MIN 0.200 (5,08) MAX Seating Plane 0.130 (3,30) MIN 0.023 (0,58) 0.015 (0,38) 0°–15° 0.100 (2,54) 0.014 (0,36) 0.008 (0,20) 4040107/C 08/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters).
PAGE 15
PAGE 16
PAGE 17
PAGE 18
PAGE 19
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.