Datasheet

OPA227, 2227, 4227

OPA228, 2228, 4228

SBOS110A

www.ti.com

ABSOLUTE MAXIMUM RATINGS

(1)

Supply Voltage .................................................................................. ±18V

Signal Input Terminals, Voltage ........................(V–) –0.7V to (V+) +0.7V

Current ....................................................... 20mA

Output Short-Circuit

(2)

.............................................................. Continuous

Operating Temperature ..................................................–55°C to +125°C

Storage Temperature ..................................................... –65°C to +150°C

Junction Temperature ...................................................................... 150°C

Lead Temperature (soldering, 10s) ................................................. 300°C

NOTE: (1) Stresses above these ratings may cause permanent damage.

Exposure to absolute maximum conditions for extended periods may degrade

device reliability. (2) Short-circuit to ground, one amplifier per package.

ELECTROSTATIC

DISCHARGE SENSITIVITY

This integrated circuit can be damaged by ESD. Texas Instru-

ments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling

and installation procedures can cause damage.

ESD damage can range from subtle performance degradation

to complete device failure. Precision integrated circuits may be

more susceptible to damage because very small parametric

changes could cause the device not to meet its published

specifications.

For the most current package and ordering information, see

the Package Option Addendum located at the end of this

datasheet, or refer to our web site at www.ti.com.

PACKAGE/ORDERING INFORMATION