Datasheet

3
®
OPA353, 2353, 4353
PACKAGE/ORDERING INFORMATION
Supply Voltage ................................................................................... 5.5V
Signal Input Terminals, Voltage
(2)
.................. (V–) – 0.3V to (V+) + 0.3V
Current
(2)
.................................................... 10mA
Output Short-Circuit
(3)
.............................................................. Continuous
Operating Temperature ..................................................–55°C to +125°C
Storage Temperature ..................................................... –55°C to +125°C
Junction Temperature ...................................................................... 150°C
Lead Temperature (soldering, 10s) ................................................. 300°C
NOTES: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may de-
grade device reliability. (2) Input terminals are diode-clamped to the power
supply rails. Input signals that can swing more than 0.3V beyond the supply
rails should be current-limited to 10mA or less. (3) Short circuit to ground,
one amplifier per package.
ABSOLUTE MAXIMUM RATINGS
(1)
PIN CONFIGURATION
Top View SO-14
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes no responsibility
for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or
licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant any BURR-BROWN product for use in life support
devices and/or systems.
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degrada-
tion to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.
1
2
3
4
5
6
7
14
13
12
11
10
9
8
Out D
–In D
+In D
V–
+In C
–In C
Out C
Out A
–In A
+In A
V+
+In B
–In B
Out B
OPA4353
AD
BC
PACKAGE SPECIFIED
DRAWING TEMPERATURE PACKAGE ORDERING TRANSPORT
PRODUCT PACKAGE NUMBER
(1)
RANGE MARKING NUMBER
(2)
MEDIA
Single
OPA353NA 5-Lead SOT-23-5 331 –40°C to +85°C D53 OPA353NA/250 Tape and Reel
"""""OPA353NA/3K Tape and Reel
OPA353UA SO-8 Surface Mount 182 –40°C to +85°C OPA353UA OPA353UA Rails
"""""OPA353UA/2K5 Tape and Reel
Dual
OPA2353EA MSOP-8 Surface Mount 337 –40°C to +85°C E53 OPA2353EA/250 Tape and Reel
"""""OPA2353EA/2K5 Tape and Reel
OPA2353UA SO-8 Surface Mount 182 –40°C to +85°C OPA2353UA OPA2353UA Rails
"""""OPA2353UA/2K5 Tape and Reel
Quad
OPA4353EA SSOP-16 Surface Mount 322 –40°C to +85°C OPA4353EA OPA4353EA/250 Tape and Reel
"""""OPA4353EA/2K5 Tape and Reel
OPA4353UA SO-14 Surface Mount 235 –40°C to +85°C OPA4353UA OPA4353UA Rails
"""""OPA4353UA/2K5 Tape and Reel
NOTES: (1) For detailed drawing and dimension table, please see end of data sheet, or Appendix C of Burr-Brown IC Data Book. (2) Models with a slash (/) are
available only in Tape and Reel in the quantities indicated (e.g., /2K5 indicates 2500 devices per reel). Ordering 2500 pieces of “OPA2353EA/2K5” will get a single
2500-piece Tape and Reel. For detailed Tape and Reel mechanical information, refer to Appendix B of Burr-Brown IC Data Book.