Datasheet

OPA336, 2336, 4336
2
SBOS068C
www.ti.com
PACKAGE
DRAWING PACKAGE
PRODUCT PACKAGE-LEAD DESIGNATOR MARKING
Single
OPA336N SOT23-5 DBV A36
(2)
OPA336NA SOT23-5 DBV A36
(2)
OPA336NJ SOT23-5 DBV J36
OPA336U SO-8 Surface-Mount D OPA336U
OPA336UA SO-8 Surface-Mount D OPA336UA
OPA336UJ SO-8 Surface-Mount D OPA336UJ
Dual
OPA2336E MSOP-8 Surface-Mount DGK B36
(2)
OPA2336EA MSOP-8 Surface-Mount DGK B36
(2)
OPA2336P DIP-8 P OPA2336P
OPA2336PA DIP-8 P OPA2336PA
OPA2336U SO-8 Surface-Mount D OPA2336U
OPA2336UA SO-8 Surface-Mount D OPA2336UA
Quad
OPA4336EA SSOP-16 Surface-Mount DBQ OPA4336EA
NOTES: (1) For the most current package and ordering information, see the package option addendum at the end of this data sheet. (2) Grade will be marked on
the Reel.
PACKAGE/ORDERING INFORMATION
(1)
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Texas
Instruments recommends that all integrated circuits be handled
with appropriate precautions. Failure to observe proper han-
dling and installation procedures can cause damage.
ESD damage can range from subtle performance degrada-
tion to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.
Supply Voltage ................................................................................... 7.5V
Signal Input Terminals, Voltage
(2)
.....................(V–) –0.3V to (V+) +0.3V
Current
(2)
.................................................... 10mA
Output Short-Circuit
(3)
.............................................................. Continuous
Operating Temperature ..................................................–55°C to +125°C
Storage Temperature ..................................................... –55°C to +125°C
Junction Temperature ...................................................................... 150°C
Lead Temperature (soldering, 10s) ................................................. 300°C
ESD Rating:
Charged Device Model, OPA336 NJ and UJ only (CDM)
(4)
....... 1000V
Human Body Model (HBM)
(4)
......................................................... 500V
Machine Model (MM)
(4)
.................................................................. 100V
NOTES: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only. Functional opera-
tion of the device at these conditions, or beyond the specified operating
conditions, is not implied. (2) Input terminals are diode-clamped to the power
supply rails. Input signals that can swing more than 0.3V beyond the supply
rails should be current-limited to 10mA or less. (3) Short-circuit to ground,
one amplifier per package. (4) OPA336 NJ and UJ have been tested to CDM
of 1000V. All other previous package versions have been tested using HBM
and MM. Results are shown.
ABSOLUTE MAXIMUM RATINGS
(1)