Datasheet

MSP430G2x53

MSP430G2x13

SLAS735J –APRIL 2011–REVISED MAY 2013

www.ti.com

REVISION HISTORY

REVISION DESCRIPTION

SLAS735 Initial release

Changed Control Bits / Signals column in Table 18

SLAS735A

Changed Pin Name and Function columns in Table 23

Changed Storage temperature range limit in Absolute Maximum Ratings

SLAS735B

Added BSL functions to P1.1 and P1.5 in Table 2.

Added CAOUT information to Table 17.

Changed T

stg

, Programmed device, to -55°C to 150°C in Absolute Maximum Ratings.

SLAS735C

Changed TAG_ADC10_1 value to 0x10 in Table 10.

Added AVCC (RHB package only, pin 29) to Table 2 Terminal Functions.

Corrected typo in P3.7/TA1CLK/CAOUT description in Table 2.

SLAS735D

Corrected PW28 terminal assignment in Input and Output Pin Number columns in Table 13.

Changed all port schematics (added buffer after PxOUT.y mux) in Port Schematics.

SLAS735E

Table 5 and Table 14, Corrected Timer_A register names.

Added note on TC

REF+

in 10-Bit ADC, Built-In Voltage Reference (MSP430G2x53 Only).

SLAS735F

Corrected signal names on Port P1 Pin Schematic: P1.4, Input/Output With Schmitt Trigger.

Recommended Operating Conditions, Removed mention of USART module from f

SYSTEM

description.

SLAS735G

Port P3 Pin Schematic: P3.0 to P3.7, Input/Output With Schmitt Trigger (28-Pin PW and 32-Pin RHB Packages Only),

Added PW28 to available packages.

Recommended Operating Conditions, Added test conditions for typical values.

SLAS735H

Pin-Oscillator Frequency – Ports Px, Corrected resistor value in note (1).

POR, BOR, Added note (2).

SLAS735I Throughout, Changed all variations of touch sense

(1)

to capacitive touch.

SLAS735J Removed all information regarding MSP430G2113.

(1) TouchSense is a trademark of Immersion Corporation.