Datasheet

MSP430G2x52

MSP430G2x12

www.ti.com

SLAS722G –DECEMBER 2010–REVISED MAY 2013

Memory Organization

Table 8. Memory Organization

MSP430G2112 MSP430G2212 MSP430G2312 MSP430G2412

MSP430G2152 MSP430G2252 MSP430G2352 MSP430G2452

Memory Size 1kB 2kB 4kB 8kB

Main: interrupt vector Flash 0xFFFF to 0xFFC0 0xFFFF to 0xFFC0 0xFFFF to 0xFFC0 0xFFFF to 0xFFC0

Main: code memory Flash 0xFFFF to 0xFC00 0xFFFF to 0xF800 0xFFFF to 0xF000 0xFFFF to 0xE000

Information memory Size 256 Byte 256 Byte 256 Byte 256 Byte

Flash 010FFh to 01000h 010FFh to 01000h 010FFh to 01000h 010FFh to 01000h

RAM Size 128 B 256 B 256 B 256 B

0x027F to 0x0200 0x02FF to 0x0200 0x02FF to 0x0200 0x02FF to 0x0200

Peripherals 16-bit 01FFh to 0100h 01FFh to 0100h 01FFh to 0100h 01FFh to 0100h

8-bit 0FFh to 010h 0FFh to 010h 0FFh to 010h 0FFh to 010h

8-bit SFR 0Fh to 00h 0Fh to 00h 0Fh to 00h 0Fh to 00h

Flash Memory

The flash memory can be programmed via the Spy-Bi-Wire/JTAG port or in-system by the CPU. The CPU can

perform single-byte and single-word writes to the flash memory. Features of the flash memory include:

• Flash memory has n segments of main memory and four segments of information memory (A to D) of

64 bytes each. Each segment in main memory is 512 bytes in size.

• Segments 0 to n may be erased in one step, or each segment may be individually erased.

• Segments A to D can be erased individually or as a group with segments 0 to n. Segments A to D are also

called information memory.

• Segment A contains calibration data. After reset, segment A is protected against programming and erasing. It

can be unlocked, but care should be taken not to erase this segment if the device-specific calibration data is

required.