Datasheet

MSP430G2x32
MSP430G2x02
SLAS723H –DECEMBER 2010–REVISED MAY 2013 www.ti.com
Timer0_A3
Timer0_A3 is a 16-bit timer/counter with three capture/compare registers. Timer0_A3 can support multiple
capture/compares, PWM outputs, and interval timing. Timer0_A3 also has extensive interrupt capabilities.
Interrupts may be generated from the counter on overflow conditions and from each of the capture/compare
registers.
Table 11. Timer0_A3 Signal Connections
(1)
INPUT PIN NUMBER DEVICE MODULE MODULE OUTPUT PIN NUMBER
MODULE
INPUT INPUT OUTPUT
BLOCK
N20, PW20 PW14 RSA16 N20, PW20 PW14 RSA16
SIGNAL NAME SIGNAL
P1.0-2 P1.0-2 P1.0-1 TACLK TACLK
ACLK ACLK
Timer NA
SMCLK SMCLK
PinOsc PinOsc PinOsc INCLK
P1.1-3 P1.1-3 P1.1-2 TA0.0 CCI0A P1.1-3 P1.1-3 P1.1-2
ACLK CCI0B P1.5-7 P1.5-7 P1.5-6
CCR0 TA0
V
SS
GND
V
CC
V
CC
P1.2-4 P1.2-4 P1.2-3 TA0.1 CCI1A P1.2-4 P1.2-4 P1.2-3
CAOUT CCI1B P1.6-14 P1.6-8 P1.6-7
CCR1 TA1
V
SS
GND P2.6-19 P2.6-13 P2.6-12
V
CC
V
CC
P1.4-6 P1.4-6 P1.4-5 TA0.2 CCI2A P1.4-6 P1.4-6 P1.4-5
PinOsc PinOsc PinOsc TA0.2 CCI2B
CCR2 TA2
V
SS
GND
V
CC
V
CC
(1) Only one pin-oscillator must be enabled at a time.
USI
The universal serial interface (USI) module is used for serial data communication and provides the basic
hardware for synchronous communication protocols like SPI and I2C.
ADC10 (MSP430G2x32 Only)
The ADC10 module supports fast, 10-bit analog-to-digital conversions. The module implements a 10-bit SAR
core, sample select control, reference generator and data transfer controller, or DTC, for automatic conversion
result handling, allowing ADC samples to be converted and stored without any CPU intervention.
14 Submit Documentation Feedback Copyright © 2010–2013, Texas Instruments Incorporated