Datasheet

MSP430F5529, MSP430F5528, MSP430F5527, MSP430F5526
MSP430F5525, MSP430F5524, MSP430F5522, MSP430F5521
MSP430F5519, MSP430F5517, MSP430F5515, MSP430F5514, MSP430F5513
www.ti.com SLAS590L –MARCH 2009–REVISED MAY 2013
Interrupt Vector Addresses
The interrupt vectors and the power-up start address are located in the address range 0FFFFh to 0FF80h. The
vector contains the 16-bit address of the appropriate interrupt-handler instruction sequence.
Table 4. Interrupt Sources, Flags, and Vectors
SYSTEM WORD
INTERRUPT SOURCE INTERRUPT FLAG PRIORITY
INTERRUPT ADDRESS
System Reset
Power-Up
External Reset
WDTIFG, KEYV (SYSRSTIV)
(1)(2)
Reset 0FFFEh 63, highest
Watchdog Timeout, Password
Violation
Flash Memory Password Violation
System NMI
SVMLIFG, SVMHIFG, DLYLIFG, DLYHIFG,
PMM
VLRLIFG, VLRHIFG, VMAIFG, JMBNIFG, (Non)maskable 0FFFCh 62
Vacant Memory Access
JMBOUTIFG (SYSSNIV)
(1)
JTAG Mailbox
User NMI
NMI NMIIFG, OFIFG, ACCVIFG, BUSIFG
(Non)maskable 0FFFAh 61
Oscillator Fault (SYSUNIV)
(1)(2)
Flash Memory Access Violation
Comp_B Comparator B interrupt flags (CBIV)
(1)(3)
Maskable 0FFF8h 60
TB0 TB0CCR0 CCIFG0
(3)
Maskable 0FFF6h 59
TB0CCR1 CCIFG1 to TB0CCR6 CCIFG6,
TB0 Maskable 0FFF4h 58
TB0IFG (TB0IV)
(1)(3)
Watchdog Timer_A Interval Timer
WDTIFG Maskable 0FFF2h 57
Mode
USCI_A0 Receive or Transmit UCA0RXIFG, UCA0TXIFG (UCA0IV)
(1)(3)
Maskable 0FFF0h 56
USCI_B0 Receive or Transmit UCB0RXIFG, UCB0TXIFG (UCB0IV)
(1)(3)
Maskable 0FFEEh 55
ADC12_A ADC12IFG0 to ADC12IFG15 (ADC12IV)
(1)(3)(4)
Maskable 0FFECh 54
TA0 TA0CCR0 CCIFG0
(3)
Maskable 0FFEAh 53
TA0CCR1 CCIFG1 to TA0CCR4 CCIFG4,
TA0 Maskable 0FFE8h 52
TA0IFG (TA0IV)
(1)(3)
USB_UBM USB interrupts (USBIV)
(1)(3)
Maskable 0FFE6h 51
DMA DMA0IFG, DMA1IFG, DMA2IFG (DMAIV)
(1)(3)
Maskable 0FFE4h 50
TA1 TA1CCR0 CCIFG0
(3)
Maskable 0FFE2h 49
TA1CCR1 CCIFG1 to TA1CCR2 CCIFG2,
TA1 Maskable 0FFE0h 48
TA1IFG (TA1IV)
(1)(3)
I/O Port P1 P1IFG.0 to P1IFG.7 (P1IV)
(1)(3)
Maskable 0FFDEh 47
USCI_A1 Receive or Transmit UCA1RXIFG, UCA1TXIFG (UCA1IV)
(1)(3)
Maskable 0FFDCh 46
USCI_B1 Receive or Transmit UCB1RXIFG, UCB1TXIFG (UCB1IV)
(1)(3)
Maskable 0FFDAh 45
TA2 TA2CCR0 CCIFG0
(3)
Maskable 0FFD8h 44
TA2CCR1 CCIFG1 to TA2CCR2 CCIFG2,
TA2 Maskable 0FFD6h 43
TA2IFG (TA2IV)
(1)(3)
I/O Port P2 P2IFG.0 to P2IFG.7 (P2IV)
(1)(3)
Maskable 0FFD4h 42
RTCRDYIFG, RTCTEVIFG, RTCAIFG,
RTC_A Maskable 0FFD2h 41
RT0PSIFG, RT1PSIFG (RTCIV)
(1)(3)
0FFD0h 40
Reserved Reserved
(5)
⋮ ⋮
0FF80h 0, lowest
(1) Multiple source flags
(2) A reset is generated if the CPU tries to fetch instructions from within peripheral space or vacant memory space.
(Non)maskable: the individual interrupt-enable bit can disable an interrupt event, but the general-interrupt enable cannot disable it.
(3) Interrupt flags are located in the module.
(4) Only on devices with ADC, otherwise reserved.
(5) Reserved interrupt vectors at addresses are not used in this device and can be used for regular program code if necessary. To maintain
compatibility with other devices, it is recommended to reserve these locations.
Copyright © 2009–2013, Texas Instruments Incorporated Submit Documentation Feedback 21
Product Folder Links: MSP430F5529 MSP430F5528 MSP430F5527 MSP430F5526 MSP430F5525 MSP430F5524
MSP430F5522 MSP430F5521 MSP430F5519 MSP430F5517 MSP430F5515 MSP430F5514 MSP430F5513