Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsMicrocontrollers, Microprocessors & QuartzesEmbedded microcontroller LQFP 64 (10x10) 16-Bit 16 MHz I/O number 48

MSP430F261x

MSP430F241x

SLAS541K –JUNE 2007–REVISED NOVEMBER 2012

www.ti.com

REVISION HISTORY

LITERATURE

DESCRIPTION

NUMBER

SLAS541 Product Preview release

Production Data release

Corrected the format and the content shown on the first page.

Corrected pin number of P3.6 and P3.7 in 64-pin package in the terminal function list.

SLAS541A

Corrected the port schematics.

Corrected "calibration data" section (page 20). Typos and formatting corrected.

Added the figure "typical characteristics - LPM4 current" (Page 33).

SLAS541B Added preview of MSP430F261x BGA devices.

SLAS541C Release to market of MSP430F261x BGA devices

Added the ESD disclaimer (page 1).

Added reserved BGA pins to the terminal function list (pages 10 and following).

SLAS541D

Corrected the references in the output port parameters (page 36).

Corrected the cumulative program time of the flash (page 75).

Corrected LFXT1Sx values in Figures 23 and 24 (page 52).

SLAS541E

Corrected XT2Sx values in Figures 25 and 26 (page 54).

Corrected t

CMErase

MIN value from 200 ms to 20 ms and removed two notes in the flash memory table (page 75).

Renamed Tags Used by the ADC Calibration Tags table to Tags used by the TLV Structure (page 20).

Changed value of TAG_ADC12_1 from 0x10 to 0x08 in Tags used by the TLV Structure (page 20).

Added CAOUT to P1.0/TACLK, Changed Timer_A3.CCI0A to Timer_A3.CCI1A and Timer_A3.TA0 to Timer_A3.TA1 in

SLAS541F

P1.2/TA1 row, Changed Timer_A3.CCI0A to Timer_A3.CCI2A and Timer_A3.TA0 to Timer_A3.TA2 in P1.3/TA2 row in

Port P1 (P1.0 to P1.7) pin functions table (page 78).

Changed TA0 to Timer_A3.CCI0B in P2.2/CAOUT/TA0/CA4 row of Port P2.0, P2.3, P2.4, P2.6 and P2.7 pin functions

table (page 80).

SLAS541G Changed limits on t

d(SVSon)

parameter (page 40)

Changed Control Bits/Signals in Table 21, Table 22, and Table 23.

SLAS541H

Changed crystal signal names in Table 26 and Table 27.

SLAS541I Changed T

stg

, Programmed device, to -55°C to 150°C in Absolute Maximum Ratings.

SLAS541J Added nonmagnetic package option to Description and Table 1.

SLAS541K Changed P8.6/XT2OUT and P8.7/XT2IN to I/O in Table 2.