Datasheet

MSP430F23x
MSP430F24x(1)
MSP430F2410
SLAS547I –JUNE 2007–REVISED DECEMBER 2012 www.ti.com
Table 4. Terminal Functions, MSP430F24x1 (continued)
TERMINAL
I/O DESCRIPTION
NAME NO.
P6.1 60 I/O General-purpose digital I/O
P6.2 61 I/O General-purpose digital I/O
P6.3 2 I/O General-purpose digital I/O
P6.4 3 I/O General-purpose digital I/O
P6.5 4 I/O General-purpose digital I/O
P6.6 5 I/O General-purpose digital I/O
P6.7/SVSIN 6 I/O General-purpose digital I/O / SVS input
XT2OUT 52 O Output terminal of crystal oscillator XT2
XT2IN 53 I Input port for crystal oscillator XT2
RST/NMI 58 I Reset input, nonmaskable interrupt input, or bootstrap loader start (in flash devices).
TCK 57 I Test clock (JTAG). TCK is the clock input for device programming test and bootstrap loader start.
TDI/TCLK 55 I Test data input or test clock input. The device protection fuse is connected to TDI/TCLK.
TDO/TDI 54 I/O Test data output. TDO/TDI data output or programming data input terminal.
TMS 56 I Test mode select. TMS is used as an input port for device programming and test.
DV
SS
10 I Connected to DV
SS
Reserved 7 O Reserved, do not connect externally
DV
SS
11 I Connected to DV
SS
XIN 8 I Input for crystal oscillator XT1. Standard or watch crystals can be connected.
XOUT 9 O Output for crystal oscillator XT1. Standard or watch crystals can be connected.
QFN Pad NA NA QFN package pad connection to DV
SS
recommended (RGC package only)
14 Submit Documentation Feedback Copyright © 2007–2012, Texas Instruments Incorporated