Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsMicrocontrollers, Microprocessors & QuartzesEmbedded microcontroller VQFN 40 (6x6) 16-Bit 16 MHz I/O number 32

MSP430F22x2

MSP430F22x4

www.ti.com

SLAS504G –JULY 2006–REVISED AUGUST 2012

Special Function Registers

Most interrupt and module enable bits are collected into the lowest address space. Special function register bits

not allocated to a functional purpose are not physically present in the device. Simple software access is provided

with this arrangement.

Legend

rw Bit can be read and written.

rw-0, 1 Bit can be read and written. It is Reset or Set by PUC.

rw-(0), (1) Bit can be read and written. It is Reset or Set by POR.

SFR bit is not present in device.

Table 8. Interrupt Enable 1

Address 7 6 5 4 3 2 1 0

00h ACCVIE NMIIE OFIE WDTIE

rw-0 rw-0 rw-0 rw-0

WDTIE Watchdog timer interrupt enable. Inactive if watchdog mode is selected. Active if watchdog timer is configured in interval

timer mode.

OFIE Oscillator fault interrupt enable

NMIIE (Non)maskable interrupt enable

ACCVIE Flash access violation interrupt enable

Table 9. Interrupt Enable 2

Address 7 6 5 4 3 2 1 0

01h UCB0TXIE UCB0RXIE UCA0TXIE UCA0RXIE

rw-0 rw-0 rw-0 rw-0

UCA0RXIE USCI_A0 receive-interrupt enable

UCA0TXIE USCI_A0 transmit-interrupt enable

UCB0RXIE USCI_B0 receive-interrupt enable

UCB0TXIE USCI_B0 transmit-interrupt enable

Table 10. Interrupt Flag Register 1

Address 7 6 5 4 3 2 1 0

02h NMIIFG RSTIFG PORIFG OFIFG WDTIFG

rw-0 rw-(0) rw-(1) rw-1 rw-(0)

WDTIFG Set on watchdog timer overflow (in watchdog mode) or security key violation.

Reset on V

power-up or a reset condition at RST/NMI pin in reset mode.

OFIFG Flag set on oscillator fault

RSTIFG External reset interrupt flag. Set on a reset condition at RST/NMI pin in reset mode. Reset on V

power up.

PORIFG Power-on reset interrupt flag. Set on V

power up.

NMIIFG Set via RST/NMI pin

Table 11. Interrupt Flag Register 2

Address 7 6 5 4 3 2 1 0

03h UCB0TXIFG UCB0RXIFG UCA0TXIFG UCA0RXIFG

rw-1 rw-0 rw-1 rw-0

UCA0RXIFG USCI_A0 receive-interrupt flag

UCA0TXIFG USCI_A0 transmit-interrupt flag

UCB0RXIFG USCI_B0 receive-interrupt flag

UCB0TXIFG USCI_B0 transmit-interrupt flag