Datasheet

LM158-N, LM258-N, LM2904-N, LM358-N
SNOSBT3H –JANUARY 2000–REVISED MARCH 2013 www.ti.com
ELECTRICAL CHARACTERISTICS
V
+
= +5.0V, unless otherwise stated
Parameter Conditions LM158A LM358A LM158/LM258 Units
Min Typ Max Min Typ Max Min Typ Max
Input Offset Voltage
(1)
, T
A
= 25°C 1 2 2 3 2 5 mV
Input Bias Current I
IN(+)
or I
IN(−)
, T
A
= 25°C, 20 50 45 100 45 150 nA
V
CM
= 0V,
(2)
Input Offset Current I
IN(+)
− I
IN(−)
, V
CM
= 0V, T
A
= 25°C 2 10 5 30 3 30 nA
Input Common-Mode V
+
= 30V,
(3)
0 V
+
−1.5 0 V
+
−1.5 0 V
+
−1.5 V
Voltage Range (LM2904, V
+
= 26V), T
A
= 25°C
Supply Current Over Full Temperature Range
R
L
= ∞ on All Op Amps
V
+
= 30V (LM2904 V
+
= 26V) 1 2 1 2 1 2 mA
V
+
= 5V 0.5 1.2 0.5 1.2 0.5 1.2 mA
(1) V
O
≃ 1.4V, R
S
= 0Ω with V
+
from 5V to 30V; and over the full input common-mode range (0V to V
+
−1.5V) at 25°C. For LM2904, V
+
from
5V to 26V.
(2) The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the
state of the output so no loading change exists on the input lines.
(3) The input common-mode voltage of either input signal voltage should not be allowed to go negative by more than 0.3V (at 25°C). The
upper end of the common-mode voltage range is V
+
−1.5V (at 25°C), but either or both inputs can go to +32V without damage (+26V for
LM2904), independent of the magnitude of V
+
.
ELECTRICAL CHARACTERISTICS
V
+
= +5.0V, unless otherwise stated
Parameter Conditions LM358 LM2904 Units
Min Typ Max Min Typ Max
Input Offset Voltage See
(1)
, T
A
= 25°C 2 7 2 7 mV
Input Bias Current I
IN(+)
or I
IN(−)
, T
A
= 25°C,
45 250 45 250 nA
V
CM
= 0V, See
(2)
Input Offset Current I
IN(+)
− I
IN(−)
, V
CM
= 0V, T
A
= 25°C 5 50 5 50 nA
Input Common-Mode V
+
= 30V, See
(3)
V
+
−1. V
+
−1.
0 0 V
Voltage Range (LM2904, V
+
= 26V), T
A
= 25°C 5 5
Supply Current Over Full Temperature Range
R
L
= ∞ on All Op Amps
V
+
= 30V (LM2904 V
+
= 26V) 1 2 1 2 mA
V
+
= 5V 0.5 1.2 0.5 1.2 mA
(1) V
O
≃ 1.4V, R
S
= 0Ω with V
+
from 5V to 30V; and over the full input common-mode range (0V to V
+
−1.5V) at 25°C. For LM2904, V
+
from
5V to 26V.
(2) The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the
state of the output so no loading change exists on the input lines.
(3) The input common-mode voltage of either input signal voltage should not be allowed to go negative by more than 0.3V (at 25°C). The
upper end of the common-mode voltage range is V
+
−1.5V (at 25°C), but either or both inputs can go to +32V without damage (+26V for
LM2904), independent of the magnitude of V
+
.
4 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LM158-N LM258-N LM2904-N LM358-N